Dev

.bashrc

@@ -36,6 +36,8 @@ alias dot="cd ~/dotfiles"
 # -----------------------------------------------------
 
 alias Qtile='startx'
+alias QtileWayland='qtile start -b wayland'
+# Hyprland with Hyprland
 
 # -----------------------------------------------------
 # GIT
@@ -54,7 +56,6 @@ alias gcheck="git checkout"
 # SCRIPTS
 # -----------------------------------------------------
 
-alias wallp='~/dotfiles/scripts/updatewal.sh'
 alias gr='python ~/dotfiles/scripts/growthrate.py'
 alias ChatGPT='python ~/mychatgpt/mychatgpt.py'
 alias chat='python ~/mychatgpt/mychatgpt.py'
@@ -111,7 +112,17 @@ eval "$(starship init bash)"
 cat ~/.cache/wal/sequences
 
 # -----------------------------------------------------
-# PFETCH
+# PFETCH if on wm
 # -----------------------------------------------------
 echo ""
-pfetch
+if [[ $(tty) == *"pts"* ]]; then
+    pfetch
+else
+    if [ -f /bin/qtile ]; then
+        echo "Start Qtile X11 with command Qtile"
+        echo "Start Qtile Wayland with command QtileWayland"
+    fi
+    if [ -f /bin/hyprctl ]; then
+        echo "Start Hyprland with command Hyprland"
+    fi
+fi

.install/backup.sh

@@ -0,0 +1,46 @@
+# ------------------------------------------------------
+# Backup existing dotfiles
+# ------------------------------------------------------
+
+datets=$(date '+%Y%m%d%H%M%S')
+if [ -d ~/dotfiles ]; then
+
+cat <<"EOF"
+____             _                
+| __ )  __ _  ___| | ___   _ _ __  
+|  _ \ / _` |/ __| |/ / | | | '_ \ 
+| |_) | (_| | (__|   <| |_| | |_) |
+|____/ \__,_|\___|_|\_\\__,_| .__/ 
+                            |_|    
+
+EOF
+
+    echo "The script has detected an existing dotfiles folder and will try to create a backup into the folder ~/dotfiles-versions/backups/$datets"
+    echo ""
+    while true; do
+        read -p "Do you want to proceed? (Yy/Nn): " yn
+        case $yn in
+            [Yy]* )
+                echo "-> Preparing dotfiles"
+                if [ ! -d ~/dotfiles-versions ]; then
+                    mkdir ~/dotfiles-versions
+                fi
+                if [ ! -d ~/dotfiles-versions/backups ]; then
+                    mkdir ~/dotfiles-versions/backups
+                fi
+                if [ -d ~/dotfiles ]; then
+                    cp -r ~/dotfiles ~/dotfiles-versions/backups/$datets
+                    echo "Backup of your current dotfiles in ~/dotfiles-versions/backups/$datets created."
+                fi
+                if [ -f ~/.bashrc ]; then
+                    cp ~/.bashrc ~/dotfiles-versions/backups/$datets/.bashrc-old
+                    echo "Existing .bashrc file found in homefolder. .bashrc-old created"
+                fi
+            break;;
+            [Nn]* ) 
+            break;;
+            * ) echo "Please answer yes or no.";;
+        esac
+    done
+    echo ""
+fi

.install/bashrc.sh

@@ -0,0 +1,19 @@
+# ------------------------------------------------------
+# Install .bashrc
+# ------------------------------------------------------
+
+echo "-> Install .bashrc"
+echo "PLEASE BACKUP YOUR .bashrc file in case you want to keep your local configuration and aliases."
+while true; do
+    read -p "Do you want to install the .bashrc file? (Yy/Nn): " yn
+    case $yn in
+        [Yy]* )
+            _installSymLink .bashrc ~/.bashrc ~/dotfiles/.bashrc ~/.bashrc
+        break;;
+        [Nn]* ) 
+            echo "Installation skipped."
+        break;;
+        * ) echo "Please answer yes or no.";;
+    esac
+done
+echo ""

.install/config-folder.sh

@@ -0,0 +1,11 @@
+# ------------------------------------------------------
+# Create .config folder
+# ------------------------------------------------------
+
+if [ -d ~/.config ]; then
+    echo ".config folder already exists."
+else
+    mkdir ~/.config
+    echo ".config folder created."
+fi
+echo ""

.install/confirm-start.sh

@@ -0,0 +1,34 @@
+# ------------------------------------------------------
+# Confirm Start
+# ------------------------------------------------------
+
+echo "IMPORTANT: Please make sure that your system and your packages are up to date."
+echo "You can cancel the installation at any time with CMD + C"
+echo ""
+
+SCRIPT=$(realpath "$0")
+SCRIPTPATH=$(dirname "$SCRIPT")
+if [ $SCRIPTPATH = "/home/$USER/dotfiles" ]; then
+    echo "IMPORTANT: You're running the installation script from the installation target directory."
+    echo "Please move the installation folder dotfiles e.g. to ~/Downloads/ and start the script again."
+    echo "Proceeding is not recommended!"
+    echo ""
+    if [ ! $mode == "dev" ]; then
+        exit
+    fi
+fi
+
+while true; do
+    read -p "DO YOU WANT TO START THE INSTALLATION NOW? (Yy/Nn): " yn
+    case $yn in
+        [Yy]* )
+            echo "Installation started."
+        break;;
+        [Nn]* ) 
+            echo "Installation canceled."
+            exit;
+        break;;
+        * ) echo "Please answer yes or no.";;
+    esac
+done
+echo ""

.install/copy.sh

@@ -0,0 +1,40 @@
+# ------------------------------------------------------
+# Copy dotfiles
+# ------------------------------------------------------
+cat <<"EOF"
+ ___           _        _ _       _       _    __ _ _           
+|_ _|_ __  ___| |_ __ _| | |   __| | ___ | |_ / _(_) | ___  ___ 
+ | || '_ \/ __| __/ _` | | |  / _` |/ _ \| __| |_| | |/ _ \/ __|
+ | || | | \__ \ || (_| | | | | (_| | (_) | |_|  _| | |  __/\__ \
+|___|_| |_|___/\__\__,_|_|_|  \__,_|\___/ \__|_| |_|_|\___||___/
+                                                                
+
+EOF
+echo "The script will now remove existing directories and files from ~/.config/"
+echo "and copy your prepared configuration from ~/dotfiles-versions/$version to ~/dotfiles"
+echo "Symbolic links will then be created from ~/dotfiles into your ~/.config/ directory."
+echo "PLEASE BACKUP YOUR EXISTING CONFIGURATIONS IF NEEDED in .config"
+echo ""
+
+while true; do
+    read -p "Do you want to install the dotfiles now? (Yy/Nn): " yn
+    case $yn in
+        [Yy]* )
+            if [ ! $mode == "dev" ]; then
+                echo "Copy started"
+                if [ ! -d ~/dotfiles ]; then
+                    mkdir ~/dotfiles
+                fi   
+                cp -rf ~/dotfiles-versions/$version/. ~/dotfiles/
+            else
+                echo "Skipped: DEV MODE!"
+            fi
+        break;;
+        [Nn]* ) 
+            exit
+        break;;
+        * ) echo "Please answer yes or no.";;
+    esac
+done
+echo ""
+

.install/disabledm.sh

@@ -0,0 +1,54 @@
+# ------------------------------------------------------
+# Disable display manager
+# ------------------------------------------------------
+disman=0
+if [ -f /etc/systemd/system/display-manager.service ]; then
+
+cat <<"EOF"
+ ___                            _              _   
+|_ _|_ __ ___  _ __   ___  _ __| |_ __ _ _ __ | |_ 
+ | || '_ ` _ \| '_ \ / _ \| '__| __/ _` | '_ \| __|
+ | || | | | | | |_) | (_) | |  | || (_| | | | | |_ 
+|___|_| |_| |_| .__/ \___/|_|   \__\__,_|_| |_|\__|
+              |_|                                  
+
+EOF
+
+    echo "An active display manager has been dedected."
+    echo ""
+    if [ $profile == "Hyprland" ]; then
+        echo "IMPORTANT: Starting Hyprland from tty (terminal) with command Hyperland is recommended."
+        echo "Login with display managers could fail and could have negative side effects on some devices."
+    fi
+    if [ $profile == "Qtile" ]; then
+        echo "PLEASE NOTE: Qtile works with Display Managers."
+        echo "But if you want to use the tty based (terminal) login instead, you can disable the display manager now."
+    fi
+    if [ $profile == "All" ]; then
+        echo "IMPORTANT: Starting Hyprland from tty (terminal) with command Hyperland is recommended."
+        echo "Login with display managers could fail and could have negative side effects on some devices."
+        echo "PLEASE NOTE: Qtile works with Display Managers."
+        echo "But if you want to use the tty based (terminal) login instead, you can disable the display manager now."
+    fi
+    echo ""
+    while true; do
+        read -p "Do you want to deactive the current display manager (Yy/Nn): " yn
+        case $yn in
+            [Yy]* )
+                if [ -f /etc/systemd/system/display-manager.service ]; then
+                    sudo rm /etc/systemd/system/display-manager.service
+                    echo "Current display manager removed."
+                fi
+                disman=1
+            break;;
+            [Nn]* ) 
+                echo "Disable display manager skipped."
+                echo "You can run ~/dotfiles/hypr/script/disablewm.sh at a later point of time if needed."
+            break;;
+            * ) echo "Please answer yes or no.";;
+        esac
+    done
+    echo ""
+else
+    disman=1
+fi

.install/done.sh

@@ -0,0 +1,7 @@
+# ------------------------------------------------------
+# DONE
+# ------------------------------------------------------
+
+echo "DONE!" 
+echo "IMPORTANT: Please logout and reboot your system!"
+echo ""

.install/hyprland-dotfiles.sh

@@ -0,0 +1,23 @@
+# ------------------------------------------------------
+# Install dotfiles
+# ------------------------------------------------------
+
+if [ ! $mode == "dev" ]; then
+    _installSymLink alacritty ~/.config/alacritty ~/dotfiles/alacritty/ ~/.config
+    _installSymLink vim ~/.config/vim ~/dotfiles/vim/ ~/.config
+    _installSymLink nvim ~/.config/nvim ~/dotfiles/nvim/ ~/.config
+    _installSymLink starship ~/.config/starship.toml ~/dotfiles/starship/starship.toml ~/.config/starship.toml
+    _installSymLink rofi ~/.config/rofi ~/dotfiles/rofi/ ~/.config
+    _installSymLink dunst ~/.config/dunst ~/dotfiles/dunst/ ~/.config
+    _installSymLink hypr ~/.config/hypr ~/dotfiles/hypr/ ~/.config
+    _installSymLink waybar ~/.config/waybar ~/dotfiles/waybar/ ~/.config
+    _installSymLink swaylock ~/.config/swaylock ~/dotfiles/swaylock/ ~/.config
+    _installSymLink wlogout ~/.config/wlogout ~/dotfiles/wlogout/ ~/.config
+    _installSymLink swappy ~/.config/swappy ~/dotfiles/swappy/ ~/.config
+    _installSymLink .gtkrc-2.0 ~/.gtkrc-2.0 ~/dotfiles/gtk/.gtkrc-2.0 ~/.gtkrc-2.0
+    _installSymLink .Xresources ~/.Xresources ~/dotfiles/gtk/.Xresources ~/.Xresources
+    _installSymLink gtk-3.0 ~/.config/gtk-3.0 ~/dotfiles/gtk/gtk-3.0/ ~/.config/
+    _installSymLink gtk-4.0 ~/.config/gtk-4.0 ~/dotfiles/gtk/gtk-4.0/ ~/.config/            
+else
+    echo "Skipped: DEV MODE!"
+fi

.install/hyprland-packages.sh

@@ -0,0 +1,55 @@
+packagesPacman=(
+    "pacman-contrib"
+    "wget"
+    "unzip"
+    "alacritty" 
+    "rofi" 
+    "chromium" 
+    "dunst" 
+    "starship"
+    "neovim" 
+    "mpv" 
+    "freerdp" 
+    "xfce4-power-manager" 
+    "thunar" 
+    "mousepad" 
+    "ttf-font-awesome" 
+    "ttf-fira-sans" 
+    "ttf-fira-code" 
+    "ttf-firacode-nerd" 
+    "figlet" 
+    "vlc" 
+    "exa" 
+    "python-pip" 
+    "python-psutil" 
+    "python-rich" 
+    "python-click" 
+    "pavucontrol" 
+    "tumbler" 
+    "xautolock" 
+    "blueman"
+    "papirus-icon-theme"
+    "polkit-gnome"
+    "hyprland" 
+    "xdg-desktop-portal" 
+    "xdg-desktop-portal-wlr" 
+    "waybar" 
+    "grim" 
+    "slurp"
+    "swayidle"
+    "swappy"
+    "cliphist"
+    "qalculate-gtk"
+    "brightnessctl"
+);
+
+packagesYay=(
+    "brave-bin" 
+    "pfetch" 
+    "bibata-cursor-theme" 
+    "trizen"
+    "swww" 
+    "swaylock-effects" 
+    "wlogout"
+    "wlr-randr"
+);

.install/hyprland.sh

@@ -0,0 +1,9 @@
+cat <<"EOF"
+ _   _                  _                 _ 
+| | | |_   _ _ __  _ __| | __ _ _ __   __| |
+| |_| | | | | '_ \| '__| |/ _` | '_ \ / _` |
+|  _  | |_| | |_) | |  | | (_| | | | | (_| |
+|_| |_|\__, | .__/|_|  |_|\__,_|_| |_|\__,_|
+       |___/|_|                             
+
+EOF

.install/init-pywal.sh

@@ -0,0 +1,8 @@
+# ------------------------------------------------------
+# init pywal with default wallpaper
+# ------------------------------------------------------
+
+_installSymLink wal ~/.config/wal ~/dotfiles/wal/ ~/.config
+wal -i ~/dotfiles/wallpapers/default.jpg
+echo "Pywal and templates initiated!"
+echo ""

.install/install-packages.sh

@@ -0,0 +1,17 @@
+# ------------------------------------------------------
+# Install required packages
+# ------------------------------------------------------
+
+cat <<"EOF"
+ ___           _        _ _                    _                         
+|_ _|_ __  ___| |_ __ _| | |  _ __   __ _  ___| | ____ _  __ _  ___  ___ 
+ | || '_ \/ __| __/ _` | | | | '_ \ / _` |/ __| |/ / _` |/ _` |/ _ \/ __|
+ | || | | \__ \ || (_| | | | | |_) | (_| | (__|   < (_| | (_| |  __/\__ \
+|___|_| |_|___/\__\__,_|_|_| | .__/ \__,_|\___|_|\_\__,_|\__, |\___||___/
+                             |_|                         |___/           
+
+EOF
+
+_installPackagesPacman "${packagesPacman[@]}";
+_installPackagesYay "${packagesYay[@]}";
+echo ""

.install/issue.sh

@@ -0,0 +1,28 @@
+# ------------------------------------------------------
+# Install tty login and issue
+# ------------------------------------------------------
+
+if [ $disman == 1 ]; then
+cat <<"EOF"
+ _____ _______   __  _             _       
+|_   _|_   _\ \ / / | | ___   __ _(_)_ __  
+  | |   | |  \ V /  | |/ _ \ / _` | | '_ \ 
+  | |   | |   | |   | | (_) | (_| | | | | |
+  |_|   |_|   |_|   |_|\___/ \__, |_|_| |_|
+                             |___/         
+
+EOF
+    while true; do
+        read -p "Do you want to install the custom tty login issue (Yy/Nn): " yn
+        case $yn in
+            [Yy]* )
+                sudo cp login/issue /etc/issue
+            break;;
+            [Nn]* ) 
+                echo "Setup tty login skipped."
+            break;;
+            * ) echo "Please answer yes or no.";;
+        esac
+    done
+    echo ""
+fi

.install/library.sh

@@ -54,7 +54,7 @@ _installPackagesPacman() {
         return;
     fi;
 
-    printf "Packages not installed:\n%s\n" "${toInstall[@]}";
+    printf "Package not installed:\n%s\n" "${toInstall[@]}";
     sudo pacman --noconfirm -S "${toInstall[@]}";
 }
 
@@ -75,7 +75,7 @@ _installPackagesYay() {
         return;
     fi;
 
-    printf "AUR ackages not installed:\n%s\n" "${toInstall[@]}";
+    printf "AUR packags not installed:\n%s\n" "${toInstall[@]}";
     yay --noconfirm -S "${toInstall[@]}";
 }
 
@@ -89,40 +89,24 @@ _installSymLink() {
     linksource="$3";
     linktarget="$4";
     
-    while true; do
-        read -p "DO YOU WANT TO INSTALL ${name}? (Existing dotfiles will be removed!) (Yy/Nn): " yn
-        case $yn in
-            [Yy]* )
     if [ -L "${symlink}" ]; then
         rm ${symlink}
         ln -s ${linksource} ${linktarget} 
         echo "Symlink ${linksource} -> ${linktarget} created."
-                    echo ""
     else
         if [ -d ${symlink} ]; then
             rm -rf ${symlink}/ 
             ln -s ${linksource} ${linktarget}
             echo "Symlink for directory ${linksource} -> ${linktarget} created."
-                        echo ""
         else
             if [ -f ${symlink} ]; then
                 rm ${symlink} 
                 ln -s ${linksource} ${linktarget} 
                 echo "Symlink to file ${linksource} -> ${linktarget} created."
-                            echo ""
             else
                 ln -s ${linksource} ${linktarget} 
                 echo "New symlink ${linksource} -> ${linktarget} created."
-                            echo ""
             fi
         fi
     fi
-        break;;
-            [Nn]* ) 
-                echo ""
-                # exit;
-            break;;
-            * ) echo "Please answer yes or no.";;
-        esac
-    done
 }

.install/preparation.sh

@@ -0,0 +1,68 @@
+# ------------------------------------------------------
+# Prepare dotfiles
+# ------------------------------------------------------
+
+cat <<"EOF"
+ ____                                 _   _             
+|  _ \ _ __ ___ _ __   __ _ _ __ __ _| |_(_) ___  _ __  
+| |_) | '__/ _ \ '_ \ / _` | '__/ _` | __| |/ _ \| '_ \ 
+|  __/| | |  __/ |_) | (_| | | | (_| | |_| | (_) | | | |
+|_|   |_|  \___| .__/ \__,_|_|  \__,_|\__|_|\___/|_| |_|
+               |_|                                      
+
+EOF
+
+echo "Preparing temporary folders for the installation."
+echo ""
+if [ ! -d ~/dotfiles-versions ]; then
+    mkdir ~/dotfiles-versions
+    echo "~/dotfiles-versions folder created."
+fi
+if [ ! -d ~/dotfiles-versions/$version ]; then
+    mkdir ~/dotfiles-versions/$version
+    echo "~/dotfiles-versions/$version folder created."
+else
+    echo "The folder ~/dotfiles-versions/$version already exists."
+    echo "Do you want to create a clean build of version $version and "
+    while true; do
+        read -p "and replace all files? (Yy/Nn): " yn
+        case $yn in
+            [Yy]* )
+                rm -fr ~/dotfiles-versions/$version
+                mkdir ~/dotfiles-versions/$version
+            break;;
+            [Nn]* ) 
+            break;;
+            * ) echo "Please answer yes or no.";;
+        esac
+    done
+    echo ""
+fi            
+cp -rf . ~/dotfiles-versions/$version/
+
+if [ -d ~/dotfiles-versions/$version/.git ]; then
+    rm -rf ~/dotfiles-versions/$version/.git
+fi
+
+if [ -f ~/dotfiles-versions/$version/.gitignore ]; then
+    rm ~/dotfiles-versions/$version/.gitignore
+fi
+
+if [ -f ~/dotfiles-versions/$version/CHANGELOG ]; then
+    rm ~/dotfiles-versions/$version/CHANGELOG
+fi
+
+if [ -f ~/dotfiles-versions/$version/README.md ]; then
+    rm ~/dotfiles-versions/$version/README.md
+fi
+
+if [ -f ~/dotfiles-versions/$version/install.sh ]; then
+    rm ~/dotfiles-versions/$version/install.sh
+fi
+
+if [ -d ~/dotfiles-versions/$version/.install ]; then
+    rm -rf ~/dotfiles-versions/$version/.install
+fi
+
+echo "dotfiles $version successfully prepared in ~/dotfiles-versions/$version/"
+echo ""

.install/profile.sh

@@ -0,0 +1,42 @@
+# ------------------------------------------------------
+# Select installation profile
+# ------------------------------------------------------
+cat <<"EOF"
+ ____            _    _                ____             __ _ _      
+|  _ \  ___  ___| | _| |_ ___  _ __   |  _ \ _ __ ___  / _(_) | ___ 
+| | | |/ _ \/ __| |/ / __/ _ \| '_ \  | |_) | '__/ _ \| |_| | |/ _ \
+| |_| |  __/\__ \   <| || (_) | |_) | |  __/| | | (_) |  _| | |  __/
+|____/ \___||___/_|\_\\__\___/| .__/  |_|   |_|  \___/|_| |_|_|\___|
+                              |_|                                   
+
+EOF
+
+echo "Please select the Desktop Profile for your installation:"
+echo "1  - Hyprland"
+echo "2  - Qtile"
+echo "3  - All"
+echo "Nn - Cancel"
+echo ""
+while true; do
+    read -p "PLEASE SELECT: " yn
+    case $yn in
+        [1]* )
+            profile="Hyprland"
+        break;;
+        [2]* )
+            profile="Qtile"
+        break;;
+        [3]* )
+            profile="All"
+        break;;
+        [Nn]* ) 
+            echo "Installation canceled."
+            exit;
+        break;;
+        * ) echo "Please answer yes or no.";;
+    esac
+done
+echo ""
+echo "Installing profile $profile ..."
+sleep 2
+echo ""

.install/pywal.sh

@@ -0,0 +1,21 @@
+# ------------------------------------------------------
+# Install pywal
+# ------------------------------------------------------
+
+cat <<"EOF"
+ ___           _        _ _                             _ 
+|_ _|_ __  ___| |_ __ _| | |  _ __  _   ___      ____ _| |
+ | || '_ \/ __| __/ _` | | | | '_ \| | | \ \ /\ / / _` | |
+ | || | | \__ \ || (_| | | | | |_) | |_| |\ V  V / (_| | |
+|___|_| |_|___/\__\__,_|_|_| | .__/ \__, | \_/\_/ \__,_|_|
+                             |_|    |___/                 
+
+EOF
+
+if [ -f /usr/bin/wal ]; then
+    echo "pywal already installed."
+else
+    yay --noconfirm -S pywal
+    echo "Pywal installed."
+fi
+echo ""

.install/qtile-dotfiles.sh

@@ -0,0 +1,23 @@
+# ------------------------------------------------------
+# Install dotfiles
+# ------------------------------------------------------
+
+if [ ! $mode == "dev" ]; then
+    _installSymLink alacritty ~/.config/alacritty ~/dotfiles/alacritty/ ~/.config
+    _installSymLink vim ~/.config/vim ~/dotfiles/vim/ ~/.config
+    _installSymLink nvim ~/.config/nvim ~/dotfiles/nvim/ ~/.config
+    _installSymLink starship ~/.config/starship.toml ~/dotfiles/starship/starship.toml ~/.config/starship.toml
+    _installSymLink rofi ~/.config/rofi ~/dotfiles/rofi/ ~/.config
+    _installSymLink dunst ~/.config/dunst ~/dotfiles/dunst/ ~/.config
+    _installSymLink qtile ~/.config/qtile ~/dotfiles/qtile/ ~/.config
+    _installSymLink polybar ~/.config/polybar ~/dotfiles/polybar/ ~/.config
+    _installSymLink picom ~/.config/picom ~/dotfiles/picom/ ~/.config
+    _installSymLink .xinitrc ~/.xinitrc ~/dotfiles/qtile/.xinitrc ~/.xinitrc
+    _installSymLink swaylock ~/.config/swaylock ~/dotfiles/swaylock/ ~/.config
+    _installSymLink swappy ~/.config/swappy ~/dotfiles/swappy/ ~/.config
+    _installSymLink .gtkrc-2.0 ~/.gtkrc-2.0 ~/dotfiles/gtk/.gtkrc-2.0 ~/.gtkrc-2.0
+    _installSymLink .Xresources ~/.Xresources ~/dotfiles/gtk/.Xresources ~/.Xresources
+    _installSymLink gtk-3.0 ~/.config/gtk-3.0 ~/dotfiles/gtk/gtk-3.0/ ~/.config/       
+else
+    echo "Skipped: DEV MODE!"
+fi

.install/qtile-packages.sh

@@ -0,0 +1,57 @@
+packagesPacman=(
+    "pacman-contrib"
+    "wget"
+    "unzip"
+    "alacritty" 
+    "rofi" 
+    "chromium" 
+    "nitrogen" 
+    "dunst" 
+    "starship"
+    "neovim" 
+    "mpv" 
+    "freerdp" 
+    "xfce4-power-manager" 
+    "thunar" 
+    "mousepad" 
+    "ttf-font-awesome" 
+    "ttf-fira-sans" 
+    "ttf-fira-code" 
+    "ttf-firacode-nerd" 
+    "figlet" 
+    "vlc" 
+    "exa" 
+    "python-pip" 
+    "python-psutil" 
+    "python-rich" 
+    "python-click" 
+    "xdg-desktop-portal"
+    "xdg-desktop-portal-gtk"
+    "pavucontrol" 
+    "tumbler" 
+    "xautolock" 
+    "blueman"
+    "papirus-icon-theme"
+    "polkit-gnome"
+    "qtile" 
+    "polybar"
+    "picom"
+    "scrot"
+    "slock"
+    "grim" 
+    "slurp"
+    "swappy"
+    "cliphist"
+    "qalculate-gtk"
+    "brightnessctl"
+);
+
+packagesYay=(
+    "brave-bin" 
+    "pfetch" 
+    "bibata-cursor-theme" 
+    "trizen"
+    "swww" 
+    "qtile-extras"
+    "wlr-randr"    
+);

.install/qtile.sh

@@ -0,0 +1,8 @@
+cat <<"EOF"
+  ___  _   _ _      
+ / _ \| |_(_) | ___ 
+| | | | __| | |/ _ \
+| |_| | |_| | |  __/
+ \__\_\\__|_|_|\___|
+                    
+EOF

.install/restore.sh

@@ -0,0 +1,112 @@
+# ------------------------------------------------------
+# Restore
+# ------------------------------------------------------
+
+if [ -d ~/dotfiles ]; then
+cat <<"EOF"
+ ____           _                 
+|  _ \ ___  ___| |_ ___  _ __ ___ 
+| |_) / _ \/ __| __/ _ \| '__/ _ \
+|  _ <  __/\__ \ || (_) | | |  __/
+|_| \_\___||___/\__\___/|_|  \___|
+                                  
+EOF
+
+    echo "The script will try to restore existing configurations."
+    echo "PLEASE NOTE: Restoring is not possible with version < 2.5 of the dotfiles."
+    echo "Keyboard layout can be defined manually in the next step."
+    echo ""
+    restored=0
+
+    if [ -f ~/dotfiles/.bashrc ]; then
+        while true; do
+            read -p "Found existing ~/dotfiles/.bashrc Restore? (Yy/Nn): " yn
+            case $yn in
+                [Yy]* )
+                    cp ~/dotfiles/.bashrc ~/dotfiles-versions/$version/
+                    echo "Restored!"
+                    restored=1
+                break;;
+                [Nn]* ) 
+                break;;
+                * ) echo "Please answer yes or no.";;
+            esac
+        done
+    fi
+
+    if [ $profile == "Hyprland" ] || [ $profile == "All" ]; then
+        if [ -f ~/dotfiles/hypr/conf/keyboard.conf ]; then
+            while true; do
+                read -p "Found existing ~/dotfiles/hypr/conf/keyboard.conf Restore? (Yy/Nn): " yn
+                case $yn in
+                    [Yy]* )
+                        cp ~/dotfiles/hypr/conf/keyboard.conf ~/dotfiles-versions/$version/hypr/conf/
+                        echo "Restored!"
+                        restored=1
+                    break;;
+                    [Nn]* ) 
+                    break;;
+                    * ) echo "Please answer yes or no.";;
+                esac
+            done
+        fi
+    fi
+
+    if [ $profile = "Hyprland" ] || [ $profile == "All" ]; then
+        if [ -f ~/dotfiles/hypr/conf/monitor.conf ]; then
+            while true; do
+                read -p "Found existing ~/dotfiles/hypr/conf/monitor.conf Restore? (Yy/Nn): " yn
+                case $yn in
+                    [Yy]* )
+                        cp ~/dotfiles/hypr/conf/monitor.conf ~/dotfiles-versions/$version/hypr/conf/
+                        echo "Restored!"
+                        restored=1
+                    break;;
+                    [Nn]* ) 
+                    break;;
+                    * ) echo "Please answer yes or no.";;
+                esac
+            done
+        fi
+    fi
+
+    if [ $profile == "Hyprland" ] || [ $profile == "All" ]; then
+        if [ -f ~/dotfiles/hypr/conf/keybindings.conf ]; then
+            while true; do
+                read -p "Found existing ~/dotfiles/hypr/conf/keybindings.conf Restore? (Yy/Nn): " yn
+                case $yn in
+                    [Yy]* )
+                        cp ~/dotfiles/hypr/conf/keybindings.conf ~/dotfiles-versions/$version/hypr/conf/
+                        echo "Restored!"
+                        restored=1
+                    break;;
+                    [Nn]* ) 
+                    break;;
+                    * ) echo "Please answer yes or no.";;
+                esac
+            done
+        fi
+    fi
+
+    if [ $profile == "Qtile" ] || [ $profile == "All" ]; then
+        if [ -f ~/dotfiles/qtile/conf/keyboard.py ]; then
+            while true; do
+                read -p "Found existing ~/dotfiles/qtile/conf/keyboard.py Restore? (Yy/Nn): " yn
+                case $yn in
+                    [Yy]* )
+                        cp ~/dotfiles/qtile/conf/keyboard.py ~/dotfiles-versions/$version/qtile/conf/
+                        echo "Restored!"
+                        restored=1
+                    break;;
+                    [Nn]* ) 
+                    break;;
+                    * ) echo "Please answer yes or no.";;
+                esac
+            done
+        fi
+    fi    
+    if [ $restored == 0 ]; then
+        echo "Restore not possible."
+    fi
+    echo ""
+fi

.install/setup.sh

@@ -0,0 +1,35 @@
+# ------------------------------------------------------
+# Setup
+# ------------------------------------------------------
+
+cat <<"EOF"
+ ____       _               
+/ ___|  ___| |_ _   _ _ __  
+\___ \ / _ \ __| | | | '_ \ 
+ ___) |  __/ |_| |_| | |_) |
+|____/ \___|\__|\__,_| .__/ 
+                     |_|    
+
+EOF
+echo "If you could restore your keyboard layout in the step before you can select Nn and skip."
+while true; do
+    read -p "Do you want to start the setup (Yy/Nn): " yn
+    case $yn in
+        [Yy]* )
+            read -p "Enter your preferred keyboard layout (us,de,...) (default:us): " keyboard
+            if [ -z "$keyboard" ]; then
+                keyboard="us"
+            fi
+            SEARCH="kb_layout = de"
+            REPLACE="kb_layout = $keyboard"
+            sed -i "s/$SEARCH/$REPLACE/g" ~/dotfiles-versions/$version/hypr/conf/keyboard.conf
+
+            SEARCH="keyboard_layout = \"de\""
+            REPLACE="keyboard_layout = \"$keyboard\""
+            sed -i "s/$SEARCH/$REPLACE/g" ~/dotfiles-versions/$version/qtile/conf/keyboard.py
+        break;;
+        [Nn]* ) 
+        break;;
+        * ) echo "Please answer yes or no.";;
+    esac
+done

.install/wallpaper.sh

@@ -0,0 +1,46 @@
+# ------------------------------------------------------
+# Install wallpapers
+# ------------------------------------------------------
+
+cat <<"EOF"
+__        __    _ _                                 
+\ \      / /_ _| | |_ __   __ _ _ __   ___ _ __ ___ 
+ \ \ /\ / / _` | | | '_ \ / _` | '_ \ / _ \ '__/ __|
+  \ V  V / (_| | | | |_) | (_| | |_) |  __/ |  \__ \
+   \_/\_/ \__,_|_|_| .__/ \__,_| .__/ \___|_|  |___/
+                   |_|         |_|                  
+
+EOF
+
+echo "Do you want to download the wallpapers from repository https://gitlab.com/stephan-raabe/wallpaper/ ?"
+while true; do
+    read -p "If not, the script will install 3 default wallpapers to ~/wallpaper/ (Yy/Nn): " yn
+    case $yn in
+        [Yy]* )
+            wget -P ~/Downloads/ https://gitlab.com/stephan-raabe/wallpaper/-/archive/main/wallpaper-main.zip
+            unzip -o ~/Downloads/wallpaper-main.zip -d ~/Downloads/
+            if [ ! -d ~/wallpaper/ ]; then
+                mkdir ~/wallpaper
+            fi
+            cp ~/Downloads/wallpaper-main/* ~/wallpaper/
+            echo "Wallpapers installed successfully."
+        break;;
+        [Nn]* ) 
+            if [ -d ~/wallpaper/ ]; then
+                echo "wallpaper folder already exists."
+            else
+                mkdir ~/wallpaper
+            fi
+            cp wallpapers/* ~/wallpaper
+            echo "Default wallpapers installed."
+        break;;
+        * ) echo "Please answer yes or no.";;
+    esac
+done
+echo ""
+
+# ------------------------------------------------------
+# Copy default wallpaper to .cache
+# ------------------------------------------------------
+cp wallpapers/default.jpg ~/.cache/current_wallpaper.jpg
+echo ""

.install/yay.sh

@@ -0,0 +1,19 @@
+# ------------------------------------------------------
+# Check if yay is installed
+# ------------------------------------------------------
+
+if sudo pacman -Qs yay > /dev/null ; then
+    echo "yay is already installed!"
+else
+    echo "yay is not installed. Will be installed now!"
+    _installPackagesPacman "base-devel"
+    SCRIPT=$(realpath "$0")
+    temp_path=$(dirname "$SCRIPT")
+    echo $temp_path
+    git clone https://aur.archlinux.org/yay-git.git ~/yay-git
+    cd ~/yay-git
+    makepkg -si
+    cd $temp_path
+    echo "yay has been installed successfully."
+fi
+echo ""

1-install.sh

@@ -1,213 +0,0 @@
-#/bin/bash
-#  ___           _        _ _  
-# |_ _|_ __  ___| |_ __ _| | | 
-#  | || '_ \/ __| __/ _` | | | 
-#  | || | | \__ \ || (_| | | | 
-# |___|_| |_|___/\__\__,_|_|_| 
-#                              
-# by Stephan Raabe (2023) 
-# ----------------------------------------------------- 
-# Install Script for required packages
-# ------------------------------------------------------
-
-# ------------------------------------------------------
-# Load Library
-# ------------------------------------------------------
-source $(dirname "$0")/scripts/library.sh
-clear
-echo "  ___           _        _ _  "
-echo " |_ _|_ __  ___| |_ __ _| | | "
-echo "  | ||  _ \/ __| __/ _  | | | "
-echo "  | || | | \__ \ || (_| | | | "
-echo " |___|_| |_|___/\__\__,_|_|_| "
-echo "                              "
-echo "by Stephan Raabe (2023)"
-echo "-------------------------------------"
-echo ""
-
-# ------------------------------------------------------
-# Check if yay is installed
-# ------------------------------------------------------
-if sudo pacman -Qs yay > /dev/null ; then
-    echo "yay is installed. You can proceed with the installation"
-else
-    echo "yay is not installed. Will be installed now!"
-    _installPackagesPacman "base-devel"
-    git clone https://aur.archlinux.org/yay-git.git ~/yay-git
-    cd ~/yay-git
-    makepkg -si
-    cd ~/dotfiles/
-    clear
-    echo "yay has been installed successfully."
-    echo ""
-    echo "  ___           _        _ _  "
-    echo " |_ _|_ __  ___| |_ __ _| | | "
-    echo "  | ||  _ \/ __| __/ _  | | | "
-    echo "  | || | | \__ \ || (_| | | | "
-    echo " |___|_| |_|___/\__\__,_|_|_| "
-    echo "                              "
-    echo "by Stephan Raabe (2023)"
-    echo "-------------------------------------"
-    echo ""
-fi
-
-# ------------------------------------------------------
-# Confirm Start
-# ------------------------------------------------------
-
-while true; do
-    read -p "DO YOU WANT TO START THE INSTALLATION NOW? (Yy/Nn): " yn
-    case $yn in
-        [Yy]* )
-            echo "Installation started."
-        break;;
-        [Nn]* ) 
-            exit;
-        break;;
-        * ) echo "Please answer yes or no.";;
-    esac
-done
-
-# ------------------------------------------------------
-# Install required packages
-# ------------------------------------------------------
-echo ""
-echo "-> Install main packages"
-
-packagesPacman=(
-    "pacman-contrib"
-    "alacritty" 
-    "rofi" 
-    "chromium" 
-    "nitrogen" 
-    "dunst" 
-    "starship"
-    "neovim" 
-    "mpv" 
-    "freerdp" 
-    "xfce4-power-manager" 
-    "thunar" 
-    "mousepad" 
-    "ttf-font-awesome" 
-    "ttf-fira-sans" 
-    "ttf-fira-code" 
-    "ttf-firacode-nerd" 
-    "figlet" 
-    "vlc" 
-    "exa" 
-    "python-pip" 
-    "python-psutil" 
-    "python-rich" 
-    "python-click" 
-    "xdg-desktop-portal-gtk"
-    "pavucontrol" 
-    "tumbler" 
-    "xautolock" 
-    "blueman"
-    "sddm"
-    "papirus-icon-theme"
-);
-
-packagesYay=(
-    "brave-bin" 
-    "pfetch" 
-    "bibata-cursor-theme" 
-    "trizen"
-    "sddm-sugar-dark"
-);
-  
-# ------------------------------------------------------
-# Install required packages
-# ------------------------------------------------------
-_installPackagesPacman "${packagesPacman[@]}";
-_installPackagesYay "${packagesYay[@]}";
-
-# ------------------------------------------------------
-# Install pywal
-# ------------------------------------------------------
-if [ -f /usr/bin/wal ]; then
-    echo "pywal already installed."
-else
-    yay --noconfirm -S pywal
-fi
-
-clear
-
-# ------------------------------------------------------
-# Install .bashrc
-# ------------------------------------------------------
-echo ""
-echo "-> Install .bashrc"
-
-_installSymLink .bashrc ~/.bashrc ~/dotfiles/.bashrc ~/.bashrc
-
-# ------------------------------------------------------
-# Install sddm display manager
-# ------------------------------------------------------
-echo ""
-echo "-> Install sddm display manager"
-while true; do
-    read -p "Do you want to install the custom login promt? (Yy/Nn): " yn
-    case $yn in
-        [Yy]* )
-            sudo systemctl enable sddm.service
-        break;;
-        [Nn]* ) 
-            echo "sddm installation skipped."
-        break;;
-        * ) echo "Please answer yes or no.";;
-    esac
-done
-
-# ------------------------------------------------------
-# Install wallpapers
-# ------------------------------------------------------
-echo ""
-echo "-> Install wallapers"
-while true; do
-    read -p "Do you want to clone the wallpapers? If not, the script will install 3 default wallpapers to ~/wallpaper/ (Yy/Nn): " yn
-    case $yn in
-        [Yy]* )
-            if [ -d ~/wallpaper/ ]; then
-                echo "wallpaper folder already exists."
-            else
-                git clone https://gitlab.com/stephan-raabe/wallpaper.git ~/wallpaper
-                echo "wallpaper installed."
-            fi
-            echo "Wallpaper installed."
-        break;;
-        [Nn]* ) 
-            if [ -d ~/wallpaper/ ]; then
-                echo "wallpaper folder already exists."
-            else
-                mkdir ~/wallpaper
-            fi
-            cp ~/dotfiles/wallpapers/* ~/wallpaper
-            echo "Default wallpapers installed."
-        break;;
-        * ) echo "Please answer yes or no.";;
-    esac
-done
-
-# ------------------------------------------------------
-# Init pywal
-# ------------------------------------------------------
-echo ""
-echo "-> Init pywal"
-wal -i ~/dotfiles/wallpapers/default.jpg
-echo "pywal initiated."
-
-# ------------------------------------------------------
-# Copy default wallpaper to .cache
-# ------------------------------------------------------
-echo ""
-echo "-> Copy default wallpaper to .cache"
-cp ~/dotfiles/wallpapers/default.jpg ~/.cache/current_wallpaper.jpg
-echo "default wallpaper copied."
-
-# ------------------------------------------------------
-# DONE
-# ------------------------------------------------------
-clear
-echo "DONE!" 
-echo "NEXT: Please continue with 2-install-hyprland.sh and/or 2-install-qtile.sh"

2-install-hyprland.sh

@@ -1,76 +0,0 @@
-#!/bin/bash
-#  _   _                  _                 _  
-# | | | |_   _ _ __  _ __| | __ _ _ __   __| | 
-# | |_| | | | | '_ \| '__| |/ _` | '_ \ / _` | 
-# |  _  | |_| | |_) | |  | | (_| | | | | (_| | 
-# |_| |_|\__, | .__/|_|  |_|\__,_|_| |_|\__,_| 
-#        |___/|_|                              
-#  
-# by Stephan Raabe (2023) 
-# ----------------------------------------------------- 
-# Install Script for Hyprland
-# ------------------------------------------------------
-
-# ------------------------------------------------------
-# Confirm Start
-# ------------------------------------------------------
-source $(dirname "$0")/scripts/library.sh
-clear
-echo "  _   _                  _                 _  "
-echo " | | | |_   _ _ __  _ __| | __ _ _ __   __| | "
-echo " | |_| | | | | ,_ \| ,__| |/ _\ | ,_ \ / _, | "
-echo " |  _  | |_| | |_) | |  | | (_| | | | | (_| | "
-echo " |_| |_|\__, | .__/|_|  |_|\__,_|_| |_|\__,_| "
-echo "        |___/|_|                              "
-echo "                             " 
-echo "by Stephan Raabe (2023)"
-echo "------------------------------------------------------"
-echo ""
-
-while true; do
-    read -p "DO YOU WANT TO START THE INSTALLATION NOW? (Yy/Nn): " yn
-    case $yn in
-        [Yy]* )
-            echo "Installation started."
-        break;;
-        [Nn]* ) 
-            exit;
-        break;;
-        * ) echo "Please answer yes or no.";;
-    esac
-done
-echo ""
-
-# ------------------------------------------------------
-# Install required packages
-# ------------------------------------------------------
-echo ""
-echo "-> Install main packages"
-packagesPacman=(
-    "hyprland" 
-    "xdg-desktop-portal-wlr" 
-    "waybar" 
-    "grim" 
-    "slurp"
-    "swayidle"
-    "swappy"
-    "cliphist"
-);
-
-packagesYay=(
-    "swww" 
-    "swaylock-effects" 
-    "wlogout"
-);
-
-# ------------------------------------------------------
-# Install required packages
-# ------------------------------------------------------
-_installPackagesPacman "${packagesPacman[@]}";
-_installPackagesYay "${packagesYay[@]}";
-
-echo ""
-echo "DONE!"
-echo "NEXT: Update the keyboard layout and screen resolution in ~/dotfiles/hypr/hyprland.conf"
-echo "Then proceed with with 3-dotfiles.sh"
-

2-install-qtile.sh

@@ -1,64 +0,0 @@
-#!/bin/bash
-#   ___ _____ ___ _     _____        
-#  / _ \_   _|_ _| |   | ____|  
-# | | | || |  | || |   |  _|   
-# | |_| || |  | || |___| |___  
-#  \__\_\|_| |___|_____|_____| 
-#                               
-# by Stephan Raabe (2023)
-# ------------------------------------------------------
-# Install Script for Qtile
-# ------------------------------------------------------
-
-# ------------------------------------------------------
-# Confirm Start
-# ------------------------------------------------------
-source $(dirname "$0")/scripts/library.sh
-clear
-echo "  ___ _____ ___ _     _____  "
-echo " / _ \_   _|_ _| |   | ____| "     
-echo "| | | || |  | || |   |  _|   "
-echo "| |_| || |  | || |___| |___  "
-echo " \__\_\|_| |___|_____|_____| "
-echo "                             " 
-echo "by Stephan Raabe (2023)"
-echo "------------------------------------------------------"
-echo ""
-
-while true; do
-    read -p "DO YOU WANT TO START THE INSTALLATION NOW? (Yy/Nn): " yn
-    case $yn in
-        [Yy]* )
-            echo "Installation started."
-        break;;
-        [Nn]* ) 
-            exit;
-        break;;
-        * ) echo "Please answer yes or no.";;
-    esac
-done
-echo ""
-
-# ------------------------------------------------------
-# Install required packages
-# ------------------------------------------------------
-echo ""
-echo "-> Install main packages"
-
-packagesPacman=(
-    "qtile" 
-    "polybar"
-    "picom"
-    "scrot"
-    "slock"
-);
-
-# ------------------------------------------------------
-# Install required packages
-# ------------------------------------------------------
-_installPackagesPacman "${packagesPacman[@]}";
-
-echo ""
-echo "DONE!" 
-echo "NEXT: Update the keyboard layout and screen resolution in ~/dotfiles/qtile/autostart.sh"
-echo "Then proceed with 3-dotfiles.sh"

3-dotfiles.sh

@@ -1,120 +0,0 @@
-#!/bin/bash
-#      _       _    __ _ _           
-#   __| | ___ | |_ / _(_) | ___  ___ 
-#  / _` |/ _ \| __| |_| | |/ _ \/ __|
-# | (_| | (_) | |_|  _| | |  __/\__ \
-#  \__,_|\___/ \__|_| |_|_|\___||___/
-#                                    
-# by Stephan Raabe (2023)
-# ------------------------------------------------------
-# Install Script for dotfiles and configuration
-# yay must be installed
-# ------------------------------------------------------
-
-# ------------------------------------------------------
-# Load Library
-# ------------------------------------------------------
-source $(dirname "$0")/scripts/library.sh
-clear
-echo "     _       _    __ _ _            "
-echo "  __| | ___ | |_ / _(_) | ___  ___  "
-echo " / _' |/ _ \| __| |_| | |/ _ \/ __| "
-echo "| (_| | (_) | |_|  _| | |  __/\__ \ "
-echo " \__,_|\___/ \__|_| |_|_|\___||___/ "
-echo "                                    "
-echo "by Stephan Raabe (2023)"
-echo "-------------------------------------"
-echo ""
-echo "The script will ask for permission to remove existing directories and files from ~/.config/"
-echo "Symbolic links will then be created from ~/dotfiles into your ~/.config/ directory."
-echo "But you can decide to keep your personal versions by answering with No (Nn)."
-echo ""
-
-# ------------------------------------------------------
-# Confirm Start
-# ------------------------------------------------------
-while true; do
-    read -p "DO YOU WANT TO START THE INSTALLATION NOW? (Yy/Nn): " yn
-    case $yn in
-        [Yy]* )
-            echo "Installation started."
-        break;;
-        [Nn]* ) 
-            exit;
-        break;;
-        * ) echo "Please answer yes or no.";;
-    esac
-done
-
-# ------------------------------------------------------
-# Create .config folder
-# ------------------------------------------------------
-echo ""
-echo "-> Check if .config folder exists"
-
-if [ -d ~/.config ]; then
-    echo ".config folder already exists."
-else
-    mkdir ~/.config
-    echo ".config folder created."
-fi
-
-# ------------------------------------------------------
-# Create symbolic links
-# ------------------------------------------------------
-# name symlink source target
-
-echo ""
-echo "-------------------------------------"
-echo "-> Install general dotfiles"
-echo "-------------------------------------"
-echo ""
-
-_installSymLink alacritty ~/.config/alacritty ~/dotfiles/alacritty/ ~/.config
-_installSymLink ranger ~/.config/ranger ~/dotfiles/ranger/ ~/.config
-_installSymLink vim ~/.config/vim ~/dotfiles/vim/ ~/.config
-_installSymLink nvim ~/.config/nvim ~/dotfiles/nvim/ ~/.config
-_installSymLink starship ~/.config/starship.toml ~/dotfiles/starship/starship.toml ~/.config/starship.toml
-_installSymLink rofi ~/.config/rofi ~/dotfiles/rofi/ ~/.config
-_installSymLink dunst ~/.config/dunst ~/dotfiles/dunst/ ~/.config
-_installSymLink wal ~/.config/wal ~/dotfiles/wal/ ~/.config
-
-wal -i wallpapers/
-echo "Pywal templates initiated!"
-echo ""
-
-echo "-------------------------------------"
-echo "-> Install GTK dotfiles"
-echo "-------------------------------------"
-echo ""
-
-_installSymLink .gtkrc-2.0 ~/.gtkrc-2.0 ~/dotfiles/gtk/.gtkrc-2.0 ~/.gtkrc-2.0
-_installSymLink gtk-3.0 ~/.config/gtk-3.0 ~/dotfiles/gtk/gtk-3.0/ ~/.config/
-_installSymLink gtk-4.0 ~/.config/gtk-4.0 ~/dotfiles/gtk/gtk-4.0/ ~/.config/
-
-echo "-------------------------------------"
-echo "-> Install Qtile dotfiles"
-echo "-------------------------------------"
-echo ""
-
-_installSymLink qtile ~/.config/qtile ~/dotfiles/qtile/ ~/.config
-_installSymLink polybar ~/.config/polybar ~/dotfiles/polybar/ ~/.config
-_installSymLink picom ~/.config/picom ~/dotfiles/picom/ ~/.config
-_installSymLink .xinitrc ~/.xinitrc ~/dotfiles/qtile/.xinitrc ~/.xinitrc
-
-echo "-------------------------------------"
-echo "-> Install Hyprland dotfiles"
-echo "-------------------------------------"
-echo ""
-
-_installSymLink hypr ~/.config/hypr ~/dotfiles/hypr/ ~/.config
-_installSymLink waybar ~/.config/waybar ~/dotfiles/waybar/ ~/.config
-_installSymLink swaylock ~/.config/swaylock ~/dotfiles/swaylock/ ~/.config
-_installSymLink wlogout ~/.config/wlogout ~/dotfiles/wlogout/ ~/.config
-_installSymLink swappy ~/.config/swappy ~/dotfiles/swappy/ ~/.config
-
-# ------------------------------------------------------
-# DONE
-# ------------------------------------------------------
-echo "DONE!" 
-echo "NEXT: Please logout and reboot your system!"

CHANGELOG

@@ -1,3 +1,33 @@
+Version 2.5
+https://gitlab.com/stephan-raabe/dotfiles/-/releases/2.5
+--------------------------------------------------------
+Installation:
+- Completely reworked script
+- Can install Hyprland and/or Qtile
+- Backup of existing dotfiles possible
+- New optimized download of wallpapers from the repository
+
+General:
+- Script folder cleaned up and window manager scripts moved to related wm scripts folder
+
+Hyprland:
+- Show key bindings defined in ~/dotfiles/hypr/conf/keybindings.conf rofi menu. Opens with SUPER+CTRL+H or right click on Apps
+- Added keybinding to toggle all windows to float and back to tiling (Doesn't work with web apps)
+- Add brightness control for FN Brightness keys
+- swww loading wallpaper from last session
+- New Waybar Theme with blurred background
+- Latest Waybar supports now persistent workspaces (set to 5 by default)
+
+Qtile:
+- Add wayland support
+- New Qtile status bar theme (Qtile status bar is default theme)
+- Status bar can be switch on X11 with SUPER + SHIFT + S between Qtile bar and Polybar
+- swww/wal loading wallpaper from last session
+- Add brightness control for FN Brightness keys
+
+Known issues:
+- GTK dark theme is not always working (e.g. on Qtile Wayland)
+
 Version 2.4
 https://gitlab.com/stephan-raabe/dotfiles/-/releases/2.4
 --------------------------------------------------------

README.md

@@ -1,36 +1,38 @@
-# ML4W dotfiles
+# ML4W dotfiles Version 2.5
 
-This is my configuration of Hyprland (Wayland) and Qtile (Xorg).
+This is my configuration of Hyprland (Wayland) and Qtile (Xorg & Wayland).
-This package includes installation scripts to install and setup the required components.
+This package includes an installation script to install and setup the required components.
 
 The dotfiles are tested with Arch Linux, Manjaro Linux, EndeavourOS and Arco Linux.
 
-## Common Packages
+## General Packages
 
 - Terminal: alacritty
 - Editor: nvim
 - Prompt: starship
 - Icons: Font Awesome
-- Menus: Rofi
+- Launch Menus: Rofi
-- Colorscheme: pywal (dynamic)
+- Colorscheme: pywal
 - Browsers: chromium (brave optional)
 - Filemanager: Thunar
 - Cursor: Bibata Modern Ice
 - Icons: Papirus-Icon-Theme
 - Virtual Machine: qemu (Windows 11 with looking glass and xrdp)
 
-## Hyprland
+## Hyprland & Qtile Wayland
 
 - Status Bar: waybar
 - Screenshots: grim & slurp
 - Clipboard Manager: cliphist
-- Logout: wlogout
+- Logout Hyprland: wlogout 
+- Logout Qtile: rofi power menu
 - Screenlock: swaylock-effects
+- Qtile Bar: Qtile status bar
 
-## Qtile
+## Qtile X11
 
 - Compositor: picom
-- Status Bar: polybar
+- Status Bar: Qtile status bar + Polybar (optional)
 - Screenshots: scrot
 
 ## Templating
@@ -39,51 +41,55 @@ Hyprland & Qtile: Included is a pywal configuration that changes the color schem
 
 Hyprland: In addition, you can switch the Waybar Template with SUPER + CTRL + T or by pressing the "..." icon in Waybar. The templates are available in ~/dotfiles/waybar/themes. You can add your own personal themes into this folder. The script will read in the folder structure.
 
-## Screenshots & Video
+Qtile X11: In addition, you can switch between the Qtile status bar and Polybar with SUPER + SHIFT + S 
+
+## Screenshots Hyprland
+
+<a href="https://youtu.be/mJ9m18-7pQk" target="_blank"><img src="screenshots/v25/screenshot-25-5.png" alt="Click to watch on YouTube" /></a>
+
+<a href="https://youtu.be/mJ9m18-7pQk" target="_blank"><img src="screenshots/v25/screenshot-25-6.png" alt="Click to watch on YouTube" /></a>
 
 <a href="https://youtu.be/mJ9m18-7pQk" target="_blank">Watch on YouTube</a>
 
-<a href="https://youtu.be/mJ9m18-7pQk" target="_blank"><img src="screenshots/screenshot-24-2.png" alt="Click to watch on YouTube" /></a>
+## Screenshots Qtile X11
 
-<a href="https://youtu.be/mJ9m18-7pQk" target="_blank"><img src="screenshots/screenshot-24-3.png" alt="Click to watch on YouTube" /></a>
+<a href="https://youtu.be/mJ9m18-7pQk" target="_blank"><img src="screenshots/v25/screenshot-25-3.png" alt="Click to watch on YouTube" /></a>
 
-<a href="https://youtu.be/mJ9m18-7pQk" target="_blank"><img src="screenshots/screenshot-24-4.png" alt="Click to watch on YouTube" /></a>
+<a href="https://youtu.be/mJ9m18-7pQk" target="_blank"><img src="screenshots/v25/screenshot-25-4.png" alt="Click to watch on YouTube" /></a>
 
-<a href="https://youtu.be/mJ9m18-7pQk" target="_blank"><img src="screenshots/screenshot-24-1.png" alt="Click to watch on YouTube" /></a>
+<a href="https://youtu.be/mJ9m18-7pQk" target="_blank">Watch on YouTube</a>
+
+## Screenshots Qtile Wayland
+
+<a href="https://youtu.be/mJ9m18-7pQk" target="_blank"><img src="screenshots/v25/screenshot-25-1.png" alt="Click to watch on YouTube" /></a>
+
+<a href="https://youtu.be/mJ9m18-7pQk" target="_blank"><img src="screenshots/v25/screenshot-25-2.png" alt="Click to watch on YouTube" /></a>
 
 <a href="https://youtu.be/mJ9m18-7pQk" target="_blank">Watch on YouTube</a>
 
 <b><a href="https://gitlab.com/stephan-raabe/dotfiles/-/tree/main/screenshots?ref_type=heads">You can find more screenshots here.</a></b>
 
-## Getting started
+## Installation
 
 To make it easy for you to get started with my dotfiles, here's a list of recommended next steps.
 
-PLEASE BACKUP YOUR EXISTING .config WITH YOUR DOTFILES BEFORE STARTING THE SCRIPTS.
+PLEASE BACKUP YOUR EXISTING .config FOLDER WITH YOUR DOTFILES BEFORE STARTING THE SCRIPTS FOR INITIONAL INSTALLTION.
+
+The script will try to create a backup from an older dotfiles folder.
 
 ```
-# Make sure that you're in your home directory
+# 1.) Change into your Downloads folder
-cd
+cd ~/Downloads
 
-# Clone the repository from your home directory
+# 2.) Clone the dotfiles repository into the Downloads folder
 git clone https://gitlab.com/stephan-raabe/dotfiles.git
 
-# Or download the lastest version and unzip into ~/dotfiles folder
+# 3.) Change into the dotfiles folder
-
-# Change into the new dotfiles folder
 cd dotfiles
 
-# Install all required packages
+# 4.) Start the installation
-./1-install.sh
+./install.sh
-
-# Install hyprland window manager
-./2-install-hyprland.sh
-# OR/AND Install qtile window manager
-./2-install-qtile.sh
-
-# Install dotfiles
-./3-install-dotfiles.sh
 
 ```
-Please note that every Arch Linux system is different and I cannot guarantee that everything works fine on your system.
 
+Please note that every Arch Linux system is different and I cannot guarantee that everything works fine on your system.

gtk/.Xresources

@@ -0,0 +1 @@
+Xcursor.theme: Bibata-Modern-Ice

hypr/conf/.hyprland.sh

@@ -0,0 +1,28 @@
+#!/bin/bash
+#    _                      _                 _  
+#   | |__  _   _ _ __  _ __| | __ _ _ __   __| | 
+#   | '_ \| | | | '_ \| '__| |/ _` | '_ \ / _` | 
+#  _| | | | |_| | |_) | |  | | (_| | | | | (_| | 
+# (_)_| |_|\__, | .__/|_|  |_|\__,_|_| |_|\__,_| 
+#          |___/|_|                              
+#  
+# ----------------------------------------------------- 
+# Overwrite hyprland configuration with hyprctl
+# Individual scripts and settings possible
+# Copy this file into your home directory
+# ----------------------------------------------------- 
+
+# ----------------------------------------------------- 
+# Keyboard Layout
+# -----------------------------------------------------
+hyprctl keyword input:kb_layout de # to de
+# hyprctl keyword input:kb_layout us # to us
+
+# ----------------------------------------------------- 
+# Monitor Setup
+# See https://wiki.hyprland.org/Configuring/Monitors/
+# ----------------------------------------------------- 
+hyprctl keyword monitor ,2560x1440@120,auto,1
+# hyprctl keyword monitor ,preferred,auto,1
+
+notify-send ".hyprland.sh exists" "hyprctl commands executed"

hypr/conf/autostart.conf

@@ -2,13 +2,23 @@
 # Autostart
 # ----------------------------------------------------- 
 
-exec-once = swww init 
+# Load Dunst Notification Manager
-# exec-once = dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP
-# exec-once = systemctl --user import-environment WAYLAND_DISPLAY XDG_CURRENT_DESKTOP
 exec-once = dunst
-exec-once = ~/dotfiles/scripts/lockscreentime.sh
+
-exec-once = ~/dotfiles/scripts/updatewal-swww.sh
+# Set Cursor Theme
-exec-once = ~/dotfiles/gtk/gtk.sh
 exec-once = hyprctl setcursor Bibata-Modern-Ice 24
-exec-once = ~/dotfiles/waybar/launch.sh
+
+# Load GTK settings
+exec-once = ~/dotfiles/gtk/gtk.sh
+
+# Load swayidle and define the lock screen time
+exec-once = ~/dotfiles/hypr/scripts/lockscreentime.sh
+
+# Load cliphist history
 exec-once = wl-paste --watch cliphist store
+
+# Initialize swww
+exec-once = swww query || swww init
+
+# Load last wallpaper and waybar with pywal colors
+exec-once = ~/dotfiles/hypr/scripts/wallpaper.sh init

hypr/conf/keybindings.conf

@@ -9,6 +9,7 @@ bind = $mainMod, Q, killactive
 bind = $mainMod, F, fullscreen
 bind = $mainMod, E, exec, dolphin
 bind = $mainMod, T, togglefloating
+bind = $mainMod SHIFT, T, exec, ~/dotfiles/hypr/scripts/toggleallfloat.sh
 bind = $mainMod, B, exec, chromium
 bind = $mainMod CTRL, B, exec, brave
 bind = $mainMod, J, togglesplit
@@ -17,12 +18,14 @@ bind = $mainMod, right, movefocus, r
 bind = $mainMod, up, movefocus, u
 bind = $mainMod, down, movefocus, d
 
-bind = $mainMod, PRINT, exec, ~/dotfiles/scripts/grim.sh
+bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh
 bind = $mainMod CTRL, Q, exec, wlogout
-bind = $mainMod SHIFT, W, exec, ~/dotfiles/scripts/updatewal-swww.sh
+bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh
-bind = $mainMod CTRL, W, exec, ~/dotfiles/scripts/wallpaper-swww.sh
+bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select
-bind = $mainMod CTRL, RETURN, exec, ~/dotfiles/scripts/applauncher.sh
+bind = $mainMod CTRL, RETURN, exec, rofi -show drun
+bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh
 bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh
+bind = $mainMod SHIFT, R, exec, ~/dotfiles/hypr/scripts/loadconfig.sh
 bind = $mainMod CTRL, F, exec, ~/dotfiles/scripts/filemanager.sh
 bind = $mainMod CTRL, C, exec, ~/dotfiles/scripts/cliphist.sh
 bind = $mainMod CTRL, T, exec, ~/dotfiles/waybar/themeswitcher.sh
@@ -60,8 +63,8 @@ bind = $mainMod SHIFT, left, resizeactive, -100 0
 bind = $mainMod SHIFT, up, resizeactive, 0 -100
 bind = $mainMod SHIFT, down, resizeactive, 0 100
 
-binde = , XF86MonBrightnessUp, exec, brightnessctl set 100%
+binde = , XF86MonBrightnessUp, exec, brightnessctl -q s +20%
-binde = , XF86MonBrightnessDown, exec, brightnessctl set 70%
+binde = , XF86MonBrightnessDown, exec, brightnessctl -q s 20%-
 
 # ----------------------------------------------------- 
 # Passthrough SUPER KEY to Virtual Machine

hypr/conf/keyboard.conf

@@ -1,13 +1,9 @@
 # ----------------------------------------------------- 
-# Keyboard layout and mouse
+# Keyboard Layout
 # -----------------------------------------------------
-
 input {
-    kb_layout = $keyboardlayout
+    kb_layout = de
-    kb_variant =
+    # kb_layout = us
-    kb_model =
-    kb_options =
-    kb_rules =
     follow_mouse = 1
     touchpad {
         natural_scroll = false

hypr/conf/monitor.conf

@@ -0,0 +1,8 @@
+# ----------------------------------------------------- 
+# Monitor Setup
+# See https://wiki.hyprland.org/Configuring/Monitors/
+# ----------------------------------------------------- 
+
+monitor=,preferred,auto,1
+# monitor=,1920x1080,auto,1
+# monitor=,2560x1440@120,auto,1

hypr/hyprland.conf

@@ -9,18 +9,10 @@
 # ----------------------------------------------------- 
 
 # ----------------------------------------------------- 
-# Keyboard Layout
+# Keyboard & Monitor
 # ----------------------------------------------------- 
-# $keyboardlayout=de
+source = ~/dotfiles/hypr/conf/keyboard.conf
-$keyboardlayout=us
+source = ~/dotfiles/hypr/conf/monitor.conf
-
-# ----------------------------------------------------- 
-# Monitor Setup
-# See https://wiki.hyprland.org/Configuring/Monitors/
-# ----------------------------------------------------- 
-monitor=,preferred,auto,1
-# monitor=,2560x1440@120,auto,1
-# monitor=,1920x1080,auto,1
 
 # ----------------------------------------------------- 
 # Autostart & Environment
@@ -36,7 +28,6 @@ source = ~/.cache/wal/colors-hyprland.conf
 # ----------------------------------------------------- 
 # Load configuration files
 # ----------------------------------------------------- 
-source = ~/dotfiles/hypr/conf/keyboard.conf
 source = ~/dotfiles/hypr/conf/window.conf
 source = ~/dotfiles/hypr/conf/decoration.conf
 source = ~/dotfiles/hypr/conf/layouts.conf

hypr/scripts/disabledm.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+clear
+echo "Hyprland recommends the start with the tty login."
+echo "You can deactivate the current display manager (if exists)."
+echo ""
+echo "-> Do you really want to deactivate the display manager?"
+while true; do
+    read -p "Do you want to enable the sddm display manager and setup theme? (Yy/Nn): " yn
+    case $yn in
+        [Yy]* )
+            if [ -f /etc/systemd/system/display-manager.service ]; then
+                sudo rm /etc/systemd/system/display-manager.service
+                echo "Current display manager removed."
+            else
+                echo "No active display manager found."
+            fi
+        break;;
+        [Nn]* ) 
+            exit
+        break;;
+        * ) echo "Please answer yes or no.";;
+    esac
+done

hypr/scripts/keybindings.sh

@@ -0,0 +1,25 @@
+#!/bin/bash
+#  _              _     _           _ _                  
+# | | _____ _   _| |__ (_)_ __   __| (_)_ __   __ _ ___  
+# | |/ / _ \ | | | '_ \| | '_ \ / _` | | '_ \ / _` / __| 
+# |   <  __/ |_| | |_) | | | | | (_| | | | | | (_| \__ \ 
+# |_|\_\___|\__, |_.__/|_|_| |_|\__,_|_|_| |_|\__, |___/ 
+#           |___/                             |___/      
+# by Stephan Raabe (2023) 
+# ----------------------------------------------------- 
+
+# ----------------------------------------------------- 
+# Define keybindings.conf location
+# ----------------------------------------------------- 
+config_file=~/dotfiles/hypr/conf/keybindings.conf
+
+# ----------------------------------------------------- 
+# Parse keybindings
+# ----------------------------------------------------- 
+keybinds=$(grep -oP '(?<=bind = ).*' $config_file)
+keybinds=$(echo "$keybinds" | sed 's/$mainMod/SUPER/g'|  sed 's/,\([^,]*\)$/ = \1/' | sed 's/, exec//g' | sed 's/^,//g')
+
+# ----------------------------------------------------- 
+# Show keybindings in rofi
+# ----------------------------------------------------- 
+rofi -dmenu -p "Keybinds" -config ~/dotfiles/rofi/config-compact.rasi <<< "$keybinds"

hypr/scripts/loadconfig.sh

@@ -0,0 +1,5 @@
+#!/bin/bash
+if [ -f ~/.hyprland.sh ]; then
+    sleep 1
+    ~/.hyprland.sh
+fi

hypr/scripts/screenshot.sh

@@ -17,18 +17,16 @@ option3="Fullscreen (delay 3 sec)"
 
 options="$option2\n$option3"
 
-choice=$(echo -e "$options" | rofi -dmenu -config ~/dotfiles/rofi/config-screenshot.rasi -i -no-show-icons -l 4 -width 30 -p "Take Screenshot")
+choice=$(echo -e "$options" | rofi -dmenu -config ~/dotfiles/rofi/config-screenshot.rasi -i -no-show-icons -l 2 -width 30 -p "Take Screenshot")
 
 case $choice in
     $option2)
         grim -g "$(slurp)" - | swappy -f -
-        # grim -g "$(slurp)" $(xdg-user-dir PICTURES)/screenshots/$(date +'%s_grim.png')
         notify-send "Screenshot created" "Mode: Selected area"
     ;;
     $option3)
         sleep 3
         grim - | swappy -f -
-        # grim $(xdg-user-dir PICTURES)/screenshots/$(date +'%s_grim.png')
         notify-send "Screenshot created" "Mode: Fullscreen"
     ;;
 esac

hypr/scripts/toggleallfloat.sh

@@ -0,0 +1,11 @@
+#!/bin/bash
+#     _    _ _  __ _             _    
+#    / \  | | |/ _| | ___   __ _| |_  
+#   / _ \ | | | |_| |/ _ \ / _` | __| 
+#  / ___ \| | |  _| | (_) | (_| | |_  
+# /_/   \_\_|_|_| |_|\___/ \__,_|\__| 
+#                                     
+# by Stephan Raabe (2023) 
+# ----------------------------------------------------- 
+
+hyprctl dispatch workspaceopt allfloat

hypr/scripts/wallpaper.sh

@@ -1,23 +1,47 @@
 #!/bin/bash
-#  _____ _                           ______        ____        ____        __ 
+#                _ _                              
-# |_   _| |__   ___ _ __ ___   ___  / ___\ \      / /\ \      / /\ \      / / 
+# __      ____ _| | |_ __   __ _ _ __   ___ _ __  
-#   | | | '_ \ / _ \ '_ ` _ \ / _ \ \___ \\ \ /\ / /  \ \ /\ / /  \ \ /\ / /  
+# \ \ /\ / / _` | | | '_ \ / _` | '_ \ / _ \ '__| 
-#   | | | | | |  __/ | | | | |  __/  ___) |\ V  V /    \ V  V /    \ V  V /   
+#  \ V  V / (_| | | | |_) | (_| | |_) |  __/ |    
-#   |_| |_| |_|\___|_| |_| |_|\___| |____/  \_/\_/      \_/\_/      \_/\_/    
+#   \_/\_/ \__,_|_|_| .__/ \__,_| .__/ \___|_|    
-#                                                                             
+#                   |_|         |_|               
 #  
 # by Stephan Raabe (2023) 
 # ----------------------------------------------------- 
 
-# ----------------------------------------------------- 
+case $1 in
-# Select random wallpaper and create color scheme
+
-# ----------------------------------------------------- 
+    # Load wallpaper from .cache of last session 
-wal -q -i ~/wallpaper/
+    "init")
+        if [ -f ~/.cache/current_wallpaper.jpg ]; then
+            wal -q -i ~/.cache/current_wallpaper.jpg
+        else
+            wal -q -i ~/wallpaper/
+        fi
+    ;;
+
+    # Select wallpaper with rofi
+    "select")
+        selected=$(ls -1 ~/wallpaper | grep "jpg" | rofi -dmenu -config ~/dotfiles/rofi/config-wallpaper.rasi)
+        if [ ! "$selected" ]; then
+            echo "No wallpaper selected"
+            exit
+        fi
+        wal -q -i ~/wallpaper/$selected
+    ;;
+
+    # Randomly select wallpaper 
+    *)
+        wal -q -i ~/wallpaper/
+    ;;
+
+esac
 
 # ----------------------------------------------------- 
 # Load current pywal color scheme
 # ----------------------------------------------------- 
 source "$HOME/.cache/wal/colors.sh"
+echo "Wallpaper: $wallpaper"
 
 # ----------------------------------------------------- 
 # Copy selected wallpaper into .cache folder
@@ -29,22 +53,29 @@ cp $wallpaper ~/.cache/current_wallpaper.jpg
 # ----------------------------------------------------- 
 newwall=$(echo $wallpaper | sed "s|$HOME/wallpaper/||g")
 
+# ----------------------------------------------------- 
+# Reload waybar with new colors
+# -----------------------------------------------------
+~/dotfiles/waybar/launch.sh
+
 # ----------------------------------------------------- 
 # Set the new wallpaper
 # -----------------------------------------------------
+transition_type="wipe"
+# transition_type="outer"
+# transition_type="random"
+
 swww img $wallpaper \
     --transition-bezier .43,1.19,1,.4 \
     --transition-fps=60 \
-    --transition-type="random" \
+    --transition-type=$transition_type \
     --transition-duration=0.7 \
     --transition-pos "$( hyprctl cursorpos )"
 
-~/dotfiles/waybar/launch.sh
-sleep 1
-
 # ----------------------------------------------------- 
 # Send notification
 # ----------------------------------------------------- 
+sleep 1
 notify-send "Colors and Wallpaper updated" "with image $newwall"
 
 echo "DONE!"

hypr/starthypr.sh

@@ -1,4 +0,0 @@
-#!/bin/sh
-export WLR_NO_HARDWARE_CURSORS=1
-export WLR_RENDERER_ALLOW_SOFTWARE=1
-exec Hyprland

install.sh

@@ -0,0 +1,76 @@
+#!/bin/bash
+clear
+
+# Set installation mode
+mode="live"
+if [ ! -z $1 ]; then
+    mode="dev"
+    echo "IMPORTANT: DEV MODE ACTIVATED. "
+    echo "Existing dotfiles folder will not be modified."
+    echo "Symbolic links will not be created."
+fi
+
+cat <<"EOF"
+     _       _    __ _ _           
+  __| | ___ | |_ / _(_) | ___  ___ 
+ / _` |/ _ \| __| |_| | |/ _ \/ __|
+| (_| | (_) | |_|  _| | |  __/\__ \
+ \__,_|\___/ \__|_| |_|_|\___||___/
+                                   
+EOF
+version="2.5"
+echo "Version: $version"
+echo "by Stephan Raabe 2023"
+echo ""
+echo "This script will guide you through the installation process of my dotfiles."
+echo ""
+source .install/library.sh
+source .install/confirm-start.sh
+source .install/backup.sh
+source .install/preparation.sh
+source .install/profile.sh
+if [ $profile == "Hyprland" ]; then
+    source .install/hyprland.sh
+fi
+if [ $profile == "Qtile" ]; then
+    source .install/qtile.sh
+fi
+source .install/yay.sh
+if [ $profile == "Hyprland" ]; then
+    source .install/hyprland-packages.sh
+    source .install/install-packages.sh
+fi
+if [ $profile == "Qtile" ]; then
+    source .install/qtile-packages.sh
+    source .install/install-packages.sh
+fi
+if [ $profile == "All" ]; then
+    source .install/hyprland-packages.sh
+    source .install/install-packages.sh
+    source .install/qtile-packages.sh
+    source .install/install-packages.sh
+fi
+source .install/pywal.sh
+source .install/wallpaper.sh
+source .install/disabledm.sh
+source .install/issue.sh
+source .install/restore.sh
+source .install/setup.sh
+source .install/copy.sh
+source .install/config-folder.sh
+source .install/init-pywal.sh
+if [ $profile == "Hyprland" ]; then
+    source .install/hyprland-dotfiles.sh
+fi
+if [ $profile == "Qtile" ]; then
+    source .install/qtile-dotfiles.sh
+fi
+if [ $profile == "All" ]; then
+    source .install/hyprland-dotfiles.sh
+    source .install/qtile-dotfiles.sh
+fi
+
+echo "IMPORTANT: Please check the keyboard layout and screen resolution after the rebbot of your system."
+echo ""
+
+source .install/done.sh

nixos/configuration.nix

@@ -1,124 +0,0 @@
-# Edit this configuration file to define what should be installed on
-# your system.  Help is available in the configuration.nix(5) man page
-# and in the NixOS manual (accessible by running `nixos-help`).
-
-{ config, pkgs, ... }:
-
-{
-  imports =
-    [ # Include the results of the hardware scan.
-      ./hardware-configuration.nix
-    ];
-
-  # Use the systemd-boot EFI boot loader.
-  boot.loader.systemd-boot.enable = true;
-  boot.loader.efi.canTouchEfiVariables = true;
-
-  # networking.hostName = "nixos"; # Define your hostname.
-  # Pick only one of the below networking options.
-  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
-  networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
-
-  # Set your time zone.
-  time.timeZone = "Europe/Berlin";
-
-  # Configure network proxy if necessary
-  # networking.proxy.default = "http://user:password@proxy:port/";
-  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
-
-  # Select internationalisation properties.
-  i18n.defaultLocale = "en_US.UTF-8";
-  console = {
-    font = "Lat2-Terminus16";
-  # keyMap = "de";
-    useXkbConfig = true; # use xkbOptions in tty.
-  };
-
-  # Enable the X11 windowing system.
-  # services.xserver.enable = true;
-
-  users.users.raabe = {
-    isNormalUser = true;
-    home = "/home/raabe";
-    description = "Stephan Raabe";
-    extraGroups = [ "wheel" ];
-  };
-  
-
-  # Configure keymap in X11
-  services.xserver.layout = "de";
-  # services.xserver.xkbOptions = "eurosign:e,caps:escape";
-  services.xserver.enable = true;
-  services.xserver.windowManager.qtile.enable = true;
-
-  # Enable CUPS to print documents.
-  # services.printing.enable = true;
-
-  # Enable sound.
-  # sound.enable = true;
-  # hardware.pulseaudio.enable = true;
-
-  # Enable touchpad support (enabled default in most desktopManager).
-  # services.xserver.libinput.enable = true;
-
-  # Define a user account. Don't forget to set a password with ‘passwd’.
-  # users.users.alice = {
-  #   isNormalUser = true;
-  #   extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
-  #   packages = with pkgs; [
-  #     firefox
-  #     tree
-  #   ];
-  # };
-
-  # List packages installed in system profile. To search, run:
-  # $ nix search wget
-  environment.systemPackages = with pkgs; [
-    vim
-    wget
-    qtile
-    alacritty
-    chromium
-    git
-    picom
-    rofi
-    nitrogen
-    xfce.mousepad
-  ];
-
-
-  # Some programs need SUID wrappers, can be configured further or are
-  # started in user sessions.
-  # programs.mtr.enable = true;
-  # programs.gnupg.agent = {
-  #   enable = true;
-  #   enableSSHSupport = true;
-  # };
-  programs.thunar.enable = true;
-
-  # List services that you want to enable:
-
-  # Enable the OpenSSH daemon.
-  # services.openssh.enable = true;
-
-  # Open ports in the firewall.
-  # networking.firewall.allowedTCPPorts = [ ... ];
-  # networking.firewall.allowedUDPPorts = [ ... ];
-  # Or disable the firewall altogether.
-  # networking.firewall.enable = false;
-
-  # Copy the NixOS configuration file and link it from the resulting system
-  # (/run/current-system/configuration.nix). This is useful in case you
-  # accidentally delete configuration.nix.
-  # system.copySystemConfiguration = true;
-
-  # This value determines the NixOS release from which the default
-  # settings for stateful data, like file locations and database versions
-  # on your system were taken. It's perfectly fine and recommended to leave
-  # this value at the release version of the first install of this system.
-  # Before changing this value read the documentation for this option
-  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
-  system.stateVersion = "23.05"; # Did you read the comment?
-
-}
-

polybar/config.ini

@@ -41,30 +41,6 @@ enable-ipc = true
 tray-position = right
 tray-detached = false
 
-[bar/mypolybar]
-width = 100%
-height = 20pt
-radius = 0
-background = ${colors.background}
-foreground = ${colors.foreground}
-border-size = 0pt
-border-color = #00000000
-padding-left = 2
-padding-right = 1
-module-margin = 2
-separator = ""
-separator-foreground = ${colors.disabled}
-font-0 = "Fira Sans SemiBold:size=11;2"
-font-1 = "Font Awesome 6 Free Solid:pixelsize=11;2"
-modules-left = appmenu browser chatgpt xwindow
-modules-center = xworkspaces
-modules-right = battery xkeyboard mysystem filesystem pulseaudio memory cpu date exit
-cursor-click = pointer
-cursor-scroll = ns-resize
-enable-ipc = true
-tray-position = right
-tray-detached = false
-
 [module/youtubesubs]
 type = custom/script
 exec = "python ~/private/youtube.py"
@@ -96,7 +72,7 @@ click-left = "chromium"
 type = custom/text
 content-foreground = ${colors.primary}
 content = ""
-click-left = "~/dotfiles/scripts/applauncher.sh"
+click-left = "rofi -show drun"
 
 [module/scrcpy]
 type = custom/text
@@ -126,7 +102,7 @@ click-left = "xfreerdp -grab-keyboard /v:192.168.122.42 /size:100% /cert-ignore
 type = custom/text
 content-foreground = ${colors.primary}
 content = " "
-click-left = "~/dotfiles/scripts/powermenu.sh"
+click-left = "~/dotfiles/qtile/scripts/powermenu.sh"
 
 [module/xworkspaces]
 type = internal/xworkspaces

polybar/launch.sh

@@ -12,14 +12,12 @@
 # ----------------------------------------------------- 
 # Quit running polybar instances
 # ----------------------------------------------------- 
-polybar-msg cmd quit
+killall polybar
+
+# polybar-msg cmd quit
+
 
 # ----------------------------------------------------- 
 # Loading the configuration based on the username
 # ----------------------------------------------------- 
-if [[ $USER = "raabe" ]]
+polybar -r mybar
-then
-    polybar -r mypolybar
-else
-    polybar -r mybar
-fi 

qtile/autostart_wayland.sh

@@ -0,0 +1,35 @@
+#!/bin/sh
+#   ___ _____ ___ _     _____   ____  _             _    
+#  / _ \_   _|_ _| |   | ____| / ___|| |_ __ _ _ __| |_  
+# | | | || |  | || |   |  _|   \___ \| __/ _` | '__| __| 
+# | |_| || |  | || |___| |___   ___) | || (_| | |  | |_  
+#  \__\_\|_| |___|_____|_____| |____/ \__\__,_|_|   \__| 
+#                                                        
+#  
+# by Stephan Raabe (2023) 
+# ----------------------------------------------------- 
+
+# My screen resolution
+# xrandr --rate 120
+
+# For Virtual Machine 
+# xrandr --output Virtual-1 --mode 1920x1080
+
+# Set keyboard mapping in config.py
+
+# Load power manager
+xfce4-power-manager &
+
+# Load notification service
+dunst &
+
+# Load cliphist history
+wl-paste --watch cliphist store &
+
+# Launch GTK
+~/dotfiles/gtk/gtk.sh
+
+swww init
+
+# Setup Wallpaper and update colors
+~/dotfiles/qtile/scripts/wayland/wallpaper.sh init &

qtile/autostart_x11.sh

@@ -15,9 +15,7 @@
 # For Virtual Machine 
 # xrandr --output Virtual-1 --mode 1920x1080
 
-# Set keyboard mapping
+# Set keyboard layout in config.py
-# setxkbmap de
-setxkbmap en
 
 # Load picom
 picom &
@@ -29,7 +27,9 @@ xfce4-power-manager &
 dunst &
 
 # Launch polybar
-~/dotfiles/polybar/launch.sh &
+~/dotfiles/qtile/scripts/x11/loadbar.sh
+
+sleep 1
 
 # Setup Wallpaper and update colors
-~/dotfiles/scripts/updatewal.sh &
+~/dotfiles/qtile/scripts/x11/wallpaper.sh init

qtile/conf/keyboard.py

@@ -0,0 +1,3 @@
+# Setup global keyboard layout here
+
+keyboard_layout = "de"

qtile/config.py

@@ -24,25 +24,63 @@ from libqtile.widget import Spacer, Backlight
 from libqtile.widget.image import Image
 from libqtile.dgroups import simple_key_binder
 from pathlib import Path
+from libqtile.log_utils import logger
+from libqtile.backend.wayland import InputConfig
+
+from qtile_extras import widget
+from qtile_extras.widget.decorations import RectDecoration
+from qtile_extras.widget.decorations import PowerLineDecoration
+from conf.keyboard import *
+
+# --------------------------------------------------------
+# Your configuration
+# --------------------------------------------------------
+
+# Keyboard layout in conf/keyboard.py
+
+# Show wlan status bar widget (set to False if wired network)
+# show_wlan = True
+show_wlan = False
+
+# Show bluetooth status bar widget
+# show_bluetooth = True
+show_bluetooth = False
+
+# --------------------------------------------------------
+# General Variables
+# --------------------------------------------------------
 
 # Get home path
 home = str(Path.home())
 
+# Get Core name: x11 or wayland
+core_name = qtile.core.name
+logger.warning("Using config.py with " + core_name)
+
 # --------------------------------------------------------
 # Define Status Bar
 # --------------------------------------------------------
-wm_bar = "polybar"
+if core_name == "x11":
-# wm_bar = "qtile"
+    try:
+        wm_bar = Path(home + "/.cache/.qtile_bar_x11.sh").read_text().replace("\n", "")
+    except:
+        wm_bar = "qtile"
+elif qtile.core.name == "wayland":
+    wm_bar = "qtile"
+
+logger.warning("Status bar: " + wm_bar)
 
 # --------------------------------------------------------
 # Check for Desktop/Laptop
 # --------------------------------------------------------
+
 # 3 = Desktop
 platform = int(os.popen("cat /sys/class/dmi/id/chassis_type").read())
 
 # --------------------------------------------------------
 # Set default apps
 # --------------------------------------------------------
+
 terminal = "alacritty"        
 browser = "chromium"
 # browser = "brave"
@@ -50,9 +88,12 @@ browser = "chromium"
 # --------------------------------------------------------
 # Keybindings
 # --------------------------------------------------------
+
 mod = "mod4" # SUPER KEY
 
-keys = [
+if core_name == "x11":
+    logger.warning("Using keys with x11")
+    keys = [
 
         # Focus
         Key([mod], "Left", lazy.layout.left(), desc="Move focus to left"),
@@ -71,15 +112,11 @@ keys = [
         Key([mod, "shift"], "h", lazy.layout.swap_left()),
         Key([mod, "shift"], "l", lazy.layout.swap_right()),
 
-    Key([mod], "Print", lazy.spawn(home + "/dotfiles/scripts/scrot.sh")),
+        Key([mod], "Print", lazy.spawn(home + "/dotfiles/qtile/scripts/x11/screenshot.sh")),
 
         # Size
-    # Key([mod], "h", lazy.layout.shrink(), lazy.layout.decrease_nmaster(), desc='Shrink window (MonadTall)'),
-    # Key([mod], "l", lazy.layout.grow(), lazy.layout.increase_nmaster(), desc='Expand window (MonadTall)'),
         Key([mod, "control"], "Down", lazy.layout.shrink(), desc="Grow window to the left"),
         Key([mod, "control"], "Up", lazy.layout.grow(), desc="Grow window to the right"),
-    # Key([mod, "control"], "Down", lazy.layout.grow_down(), desc="Grow window down"),
-    # Key([mod, "control"], "Up", lazy.layout.grow_up(), desc="Grow window up"),
         Key([mod], "n", lazy.layout.normalize(), desc="Reset all window sizes"),
 
         # Floating
@@ -96,20 +133,77 @@ keys = [
 
         #System
         Key([mod], "q", lazy.window.kill(), desc="Kill focused window"),
-    Key([mod, "control"], "r", lazy.reload_config(), desc="Reload the config"),
+        Key([mod, "shift"], "r", lazy.reload_config(), desc="Reload the config"),
-    Key([mod, "control"], "q", lazy.spawn(home + "/dotfiles/scripts/powermenu.sh"), desc="Open Powermenu"),
+        Key([mod, "control"], "q", lazy.spawn(home + "/dotfiles/qtile/scripts/powermenu.sh"), desc="Open Powermenu"),
+        Key([mod, "shift"], "s", lazy.spawn(home + "/dotfiles/qtile/scripts/x11/barswitcher.sh"), desc="Switch Status Bar"),
     
         # Apps
         Key([mod], "Return", lazy.spawn(terminal), desc="Launch terminal"),
-    Key([mod, "control"], "Return", lazy.spawn(home + "/dotfiles/scripts/applauncher.sh"), desc="Launch Rofi"),
+        Key([mod, "control"], "Return", lazy.spawn("rofi -show drun"), desc="Launch Rofi"),
         Key([mod], "b", lazy.spawn(browser), desc="Launch Browser"),
         Key([mod, "control"], "b", lazy.spawn(home + "/dotfiles/scripts/bravebookmarks.sh"), desc="Rofi Brave Bookmarks"),
-    Key([mod], "v", lazy.spawn(home + "/dotfiles/scripts/looking-glass.sh"), desc="Start Looking Glass Client"),
+        Key([mod, "shift"], "w", lazy.spawn(home + "/dotfiles/qtile/scripts/x11/wallpaper.sh"), desc="Update Theme and Wallpaper"),
-    Key([mod, "shift"], "w", lazy.spawn(home + "/dotfiles/scripts/updatewal.sh"), desc="Update Theme and Wallpaper"),
+        Key([mod, "control"], "w", lazy.spawn(home + "/dotfiles/qtile/scripts/x11/wallpaper.sh select"), desc="Select Theme and Wallpaper"),
-    Key([mod, "control"], "w", lazy.spawn(home + "/dotfiles/scripts/wallpaper.sh"), desc="Select Theme and Wallpaper"),
+
-    Key([mod, "control"], "t", lazy.spawn(home + "/dotfiles/scripts/templates.sh"), desc="Select Tempate and copy to clipboard"),
+        Key([], "XF86MonBrightnessUp", lazy.spawn("brightnessctl -q s +20%")),
-#    Key([], 'F10', lazy.spawn("brave --app=https://chat.openai.com"), desc="Open ChatGPT")
+        Key([], "XF86MonBrightnessDown", lazy.spawn("brightnessctl -q s 20%-"))        
-]
+    ]
+elif qtile.core.name == "wayland":
+    logger.warning("Using keys with wayland")
+
+    keys = [
+
+        # Focus
+        Key([mod], "Left", lazy.layout.left(), desc="Move focus to left"),
+        Key([mod], "Right", lazy.layout.right(), desc="Move focus to right"),
+        Key([mod], "Down", lazy.layout.down(), desc="Move focus down"),
+        Key([mod], "Up", lazy.layout.up(), desc="Move focus up"),
+        Key([mod], "space", lazy.layout.next(), desc="Move window focus to other window around"),
+        
+        # Move
+        Key([mod, "shift"], "Left", lazy.layout.shuffle_left(), desc="Move window to the left"),
+        Key([mod, "shift"], "Right", lazy.layout.shuffle_right(), desc="Move window to the right"),
+        Key([mod, "shift"], "Down", lazy.layout.shuffle_down(), desc="Move window down"),
+        Key([mod, "shift"], "Up", lazy.layout.shuffle_up(), desc="Move window up"),
+
+        # Swap
+        Key([mod, "shift"], "h", lazy.layout.swap_left()),
+        Key([mod, "shift"], "l", lazy.layout.swap_right()),
+
+        Key([mod], "Print", lazy.spawn(home + "/dotfiles/qtile/scripts/wayland/screenshot.sh")),
+
+        # Size
+        Key([mod, "control"], "Down", lazy.layout.shrink(), desc="Grow window to the left"),
+        Key([mod, "control"], "Up", lazy.layout.grow(), desc="Grow window to the right"),
+        Key([mod], "n", lazy.layout.normalize(), desc="Reset all window sizes"),
+
+        # Floating
+        Key([mod], "t", lazy.window.toggle_floating(), desc='Toggle floating'),
+        
+        # Split
+        Key([mod, "shift"], "Return", lazy.layout.toggle_split(), desc="Toggle between split and unsplit sides of stack"),
+
+        # Toggle Layouts
+        Key([mod], "Tab", lazy.next_layout(), desc="Toggle between layouts"),
+
+        # Fullscreen
+        Key([mod], "f", lazy.window.toggle_fullscreen()),
+
+        #System
+        Key([mod], "q", lazy.window.kill(), desc="Kill focused window"),
+        Key([mod, "shift"], "r", lazy.reload_config(), desc="Reload the config"),
+        Key([mod, "control"], "q", lazy.spawn(home + "/dotfiles/qtile/scripts/powermenu.sh"), desc="Open Powermenu"),
+        
+        # Apps
+        Key([mod], "Return", lazy.spawn(terminal), desc="Launch terminal"),
+        Key([mod, "control"], "Return", lazy.spawn("rofi -show drun"), desc="Launch Rofi"),
+        Key([mod], "b", lazy.spawn(browser), desc="Launch Browser"),
+        Key([mod, "shift"], "w", lazy.spawn(home + "/dotfiles/qtile/scripts/wayland/wallpaper.sh"), desc="Update Theme and Wallpaper"),
+        Key([mod, "control"], "w", lazy.spawn(home + "/dotfiles/qtile/scripts/wayland/wallpaper.sh select"), desc="Select Theme and Wallpaper"),
+
+        Key([], "XF86MonBrightnessUp", lazy.spawn("brightnessctl -q s +20%")),
+        Key([], "XF86MonBrightnessDown", lazy.spawn("brightnessctl -q s 20%-"))        
+    ]
 
 # --------------------------------------------------------
 # Groups
@@ -149,16 +243,22 @@ keys.extend([
 
 colors = os.path.expanduser('~/.cache/wal/colors.json')
 colordict = json.load(open(colors))
-ColorZ=(colordict['colors']['color0'])
+Color0=(colordict['colors']['color0'])
-ColorA=(colordict['colors']['color1'])
+Color1=(colordict['colors']['color1'])
-ColorB=(colordict['colors']['color2'])
+Color2=(colordict['colors']['color2'])
-ColorC=(colordict['colors']['color3'])
+Color3=(colordict['colors']['color3'])
-ColorD=(colordict['colors']['color4'])
+Color4=(colordict['colors']['color4'])
-ColorE=(colordict['colors']['color5'])
+Color5=(colordict['colors']['color5'])
-ColorF=(colordict['colors']['color6'])
+Color6=(colordict['colors']['color6'])
-ColorG=(colordict['colors']['color7'])
+Color7=(colordict['colors']['color7'])
-ColorH=(colordict['colors']['color8'])
+Color8=(colordict['colors']['color8'])
-ColorI=(colordict['colors']['color9'])
+Color9=(colordict['colors']['color9'])
+Color10=(colordict['colors']['color10'])
+Color11=(colordict['colors']['color11'])
+Color12=(colordict['colors']['color12'])
+Color13=(colordict['colors']['color13'])
+Color14=(colordict['colors']['color14'])
+Color15=(colordict['colors']['color15'])
 
 # --------------------------------------------------------
 # Setup Layout Theme
@@ -167,7 +267,7 @@ ColorI=(colordict['colors']['color9'])
 layout_theme = { 
     "border_width": 3,
     "margin": 15,
-    "border_focus": ColorC,
+    "border_focus": Color2,
     "border_normal": "FFFFFF",
     "single_border_width": 3
 }
@@ -177,19 +277,10 @@ layout_theme = {
 # --------------------------------------------------------
 
 layouts = [
-    # layout.Columns(),
     layout.Max(**layout_theme),
-    # Try more layouts by unleashing below layouts.
-    # layout.Stack(num_stacks=2),
-    # layout.Bsp(),
-    # layout.Matrix(),
     layout.MonadTall(**layout_theme),
     layout.MonadWide(**layout_theme),
     layout.RatioTile(**layout_theme),
-    # layout.Tile(),
-    # layout.TreeTab(),
-    # layout.VerticalTile(),
-    # layout.Zoomy(),
     layout.Floating()
 ]
 
@@ -204,12 +295,50 @@ widget_defaults = dict(
 )
 extension_defaults = widget_defaults.copy()
 
+# --------------------------------------------------------
+# Decorations
+# https://qtile-extras.readthedocs.io/en/stable/manual/how_to/decorations.html
+# --------------------------------------------------------
+
+decor_left = {
+    "decorations": [
+        PowerLineDecoration(
+            path="arrow_left"
+            # path="rounded_left"
+            # path="forward_slash"
+            # path="back_slash"
+        )
+    ],
+}
+
+decor_right = {
+    "decorations": [
+        PowerLineDecoration(
+            path="arrow_right"
+            # path="rounded_right"
+            # path="forward_slash"
+            # path="back_slash"
+        )
+    ],
+}
+
 # --------------------------------------------------------
 # Widgets
 # --------------------------------------------------------
 
 widget_list = [
+    widget.TextBox(
+        **decor_left,
+        background=Color1+".4",
+        text='Apps',
+        foreground='ffffff',
+        desc='',
+        padding=10,
+        mouse_callbacks={"Button1": lambda: qtile.cmd_spawn("rofi -show drun")},
+    ),
     widget.GroupBox(
+        **decor_left,
+        background="#ffffff.7",
         highlight_method='block',
         highlight='ffffff',
         block_border='ffffff',
@@ -221,82 +350,129 @@ widget_list = [
         active='ffffff'
     ),
     widget.TextBox(
-        text='  ',
+        **decor_left,
-        foreground=ColorC,
+        background="#ffffff.4",
-    ),
+        text=" ",
-    widget.WindowName(),
+        foreground="000000.6",
-    widget.Systray(),
-    widget.TextBox(
-        text='',
         fontsize=18,
-        foreground='ffffff',
+        mouse_callbacks={"Button1": lambda: qtile.cmd_spawn("chromium")},
-        desc='Notes',
-        mouse_callbacks={"Button1": lambda: qtile.cmd_spawn(terminal + ' -e vim ' + home + '/notes.txt')},
     ),
     widget.TextBox(
-        text='|',
+        **decor_left,
-        foreground=ColorC,
+        background="#ffffff.4",
+        text=" ",
+        foreground="000000.6",
+        fontsize=18,
+        mouse_callbacks={"Button1": lambda: qtile.cmd_spawn("thunar")}
     ),
-    widget.Volume(
+    
-        fmt='Vol: {}',
+    widget.WindowName(
+        **decor_left,
+        max_chars=50,
+        background=Color2+".4",
+        width=400,
+        padding=10
+    ),
+    widget.Spacer(),
+    widget.Spacer(
+        length=30
     ),
     widget.TextBox(
-        text='|',
+        **decor_right,
-        foreground=ColorC,
+        background="#000000.3"      
     ),    
     widget.Memory(
+        **decor_right,
+        background=Color10+".4",
+        padding=10,        
         measure_mem='G',
         format="{MemUsed:.0f}{mm} ({MemTotal:.0f}{mm})"
     ),
+    widget.Volume(
+        **decor_right,
+        background=Color12+".4",
+        padding=10, 
+        fmt='Vol: {}',
+    ),
     widget.DF(
+        **decor_right,
+        padding=10, 
+        background=Color8+".4",        
         visible_on_warn=False,
         format="{p} {uf}{m} ({r:.0f}%)"
     ),
-    widget.TextBox(
+    widget.Bluetooth(
-        text='|',
+        **decor_right,
-        foreground=ColorC,
+        background=Color2+".4",
+        padding=10,
+        mouse_callbacks={"Button1": lambda: qtile.cmd_spawn("blueman-manager")},
     ),
-    widget.Battery(),
+    widget.Wlan(
-    widget.TextBox(
+        **decor_right,
-        text='|',
+        background=Color2+".4",
-        foreground=ColorC,
+        padding=10,
+        format='{essid} {percent:2.0%}',
+        mouse_callbacks={"Button1": lambda: qtile.cmd_spawn("alacritty -e nmtui")},
     ),
     widget.Clock(
-        format="%Y-%m-%d %a %I:%M %p",
+        **decor_right,
+        background=Color4+".4",   
+        padding=10,      
+        format="%Y-%m-%d / %I:%M %p",
     ),
     widget.TextBox(
-        text='|',
+        **decor_right,
-        foreground=ColorC,
+        background=Color2+".4",     
-    ),
+        padding=5,    
-    widget.QuickExit(
+        text="",
-        default_text=" ",
         fontsize=20,
-        countdown_start=3,
+        mouse_callbacks={"Button1": lambda: qtile.cmd_spawn(home + "/dotfiles/scripts/cliphist.sh")},
-        countdown_format="{}"
+    ),
+    widget.TextBox(
+        **decor_right,
+        background=Color2+".4",     
+        padding=5,    
+        text=" ",
+        fontsize=20,
+        mouse_callbacks={"Button1": lambda: qtile.cmd_spawn(home + "/dotfiles/qtile/scripts/powermenu.sh")},
     ),
 ]
 
-if (platform == 3):
+# Hide Modules if not on laptop
-    del widget_list[10:12]
+if (show_wlan == False):
+    del widget_list[12:13]
+
+if (show_bluetooth == False):
+    del widget_list[11:12]
+
+if (core_name == "x11"):
+    del widget_list[12:13]
 
 # --------------------------------------------------------
 # Screens
 # --------------------------------------------------------
 
-if (wm_bar == "polybar"):
+if (wm_bar == "qtile"):
-    screens = [Screen(top=bar.Gap(size=28))]
+    logger.warning("Loading qtile bar")
-else:
     screens = [
         Screen(
             top=bar.Bar(
     		    widget_list,
-                24,
+                30,
+                padding=20,
                 opacity=0.7,
-                border_width=[3, 0, 3, 0],
+                border_width=[0, 0, 0, 0],
-                margin=[0,0,0,0]
+                margin=[0,0,0,0],
+                background="#000000.3"
             ),
         ),
     ]
+else:
+    screens = [Screen(top=bar.Gap(size=28))]
+    if (core_name == "x11"):
+        screens = [Screen(top=bar.Gap(size=28))]
+    else:
+        screens = [Screen(top=bar.Gap(size=0))]
 
 # --------------------------------------------------------
 # Drag floating layouts
@@ -314,7 +490,7 @@ mouse = [
 
 floating_layout = layout.Floating(
     border_width=3,
-    border_focus=ColorC,
+    border_focus=Color2,
     border_normal="FFFFFF",
     float_rules=[
         # Run the utility of `xprop` to see the wm class and name of an X client.
@@ -362,6 +538,15 @@ wl_input_rules = None
 
 wmname = "QTILE"
 
+# --------------------------------------------------------
+# Set wayland properties
+# --------------------------------------------------------
+
+# Keyboard layout
+wl_input_rules = {
+    "type:keyboard": InputConfig(kb_layout=keyboard_layout),
+}
+
 # --------------------------------------------------------
 # Hooks
 # --------------------------------------------------------
@@ -369,6 +554,12 @@ wmname = "QTILE"
 # HOOK startup
 @hook.subscribe.startup_once
 def autostart():
-    home = os.path.expanduser('~/.config/qtile/autostart.sh')
+    if qtile.core.name == "x11":
+        autostartscript = "~/.config/qtile/autostart_x11.sh"
+        subprocess.Popen(['setxkbmap',keyboard_layout])
+    elif qtile.core.name == "wayland":
+        autostartscript = "~/.config/qtile/autostart_wayland.sh"
+    
+    home = os.path.expanduser(autostartscript)
     subprocess.Popen([home])
 

qtile/scripts/powermenu.sh

@@ -8,6 +8,13 @@
 #  
 # by Stephan Raabe (2023) 
 # ----------------------------------------------------- 
+echo $XDG_SESSION_TYPE
+if [ $XDG_SESSION_TYPE == "wayland" ]; then
+	lockapp=swaylock
+else
+	lockapp=slock
+fi
+echo "Using $lockapp to lock the screen."
 
 option1="  lock"
 option2="  logout"
@@ -22,7 +29,7 @@ choice=$(echo -e "$options" | rofi -dmenu -config ~/dotfiles/rofi/config-power.r
 
 case $choice in
 	$option1)
-		slock ;;
+		$lockapp ;;
 	$option2)
 		qtile cmd-obj -o cmd -f shutdown ;;
 	$option3)

qtile/scripts/wayland/screenshot.sh

@@ -0,0 +1,32 @@
+#!/bin/bash
+#  ____                               _           _    
+# / ___|  ___ _ __ ___  ___ _ __  ___| |__   ___ | |_  
+# \___ \ / __| '__/ _ \/ _ \ '_ \/ __| '_ \ / _ \| __| 
+#  ___) | (__| | |  __/  __/ | | \__ \ | | | (_) | |_  
+# |____/ \___|_|  \___|\___|_| |_|___/_| |_|\___/ \__| 
+#                                                      
+#  
+# by Stephan Raabe (2023) 
+# ----------------------------------------------------- 
+
+DIR="$HOME/Pictures/screenshots/"
+NAME="screenshot_$(date +%d%m%Y_%H%M%S).png"
+
+option2="Selected area"
+option3="Fullscreen (delay 3 sec)"
+
+options="$option2\n$option3"
+
+choice=$(echo -e "$options" | rofi -dmenu -config ~/dotfiles/rofi/config-screenshot.rasi -i -no-show-icons -l 2 -width 30 -p "Take Screenshot")
+
+case $choice in
+    $option2)
+        grim -g "$(slurp)" - | swappy -f -
+        notify-send "Screenshot created" "Mode: Selected area"
+    ;;
+    $option3)
+        sleep 3
+        grim - | swappy -f -
+        notify-send "Screenshot created" "Mode: Fullscreen"
+    ;;
+esac

qtile/scripts/wayland/wallpaper.sh

@@ -0,0 +1,78 @@
+#!/bin/bash
+#                _ _                              
+# __      ____ _| | |_ __   __ _ _ __   ___ _ __  
+# \ \ /\ / / _` | | | '_ \ / _` | '_ \ / _ \ '__| 
+#  \ V  V / (_| | | | |_) | (_| | |_) |  __/ |    
+#   \_/\_/ \__,_|_|_| .__/ \__,_| .__/ \___|_|    
+#                   |_|         |_|               
+#  
+# by Stephan Raabe (2023) 
+# ----------------------------------------------------- 
+
+case $1 in
+
+    # Load wallpaper from .cache of last session 
+    "init")
+        if [ -f ~/.cache/current_wallpaper.jpg ]; then
+            wal -q -i ~/.cache/current_wallpaper.jpg
+        else
+            wal -q -i ~/wallpaper/
+        fi
+    ;;
+
+    # Select wallpaper with rofi
+    "select")
+        selected=$(ls -1 ~/wallpaper | grep "jpg" | rofi -dmenu -config ~/dotfiles/rofi/config-wallpaper.rasi)
+        if [ ! "$selected" ]; then
+            echo "No wallpaper selected"
+            exit
+        fi
+        wal -q -i ~/wallpaper/$selected
+    ;;
+
+    # Randomly select wallpaper 
+    *)
+        wal -q -i ~/wallpaper/
+    ;;
+
+esac
+
+# ----------------------------------------------------- 
+# Load current pywal color scheme
+# ----------------------------------------------------- 
+source "$HOME/.cache/wal/colors.sh"
+echo "Wallpaper: $wallpaper"
+
+# ----------------------------------------------------- 
+# Copy selected wallpaper into .cache folder
+# ----------------------------------------------------- 
+cp $wallpaper ~/.cache/current_wallpaper.jpg
+
+# ----------------------------------------------------- 
+# get wallpaper iamge name
+# ----------------------------------------------------- 
+newwall=$(echo $wallpaper | sed "s|$HOME/wallpaper/||g")
+
+# ----------------------------------------------------- 
+# Set the new wallpaper
+# -----------------------------------------------------
+swww init
+
+transition_type="wipe"
+# transition_type="outer"
+# transition_type="random"
+
+swww img $wallpaper \
+    --transition-bezier .43,1.19,1,.4 \
+    --transition-fps=60 \
+    --transition-type=$transition_type \
+    --transition-duration=0.7 \
+
+qtile cmd-obj -o cmd -f reload_config
+
+# ----------------------------------------------------- 
+# Send notification
+# ----------------------------------------------------- 
+notify-send "Colors and Wallpaper updated" "with image $newwall"
+
+echo "DONE!"

qtile/scripts/x11/barswitcher.sh

@@ -0,0 +1,32 @@
+#!/bin/bash
+#  _                             _ _       _                
+# | |__   __ _ _ __ _____      _(_) |_ ___| |__   ___ _ __  
+# | '_ \ / _` | '__/ __\ \ /\ / / | __/ __| '_ \ / _ \ '__| 
+# | |_) | (_| | |  \__ \\ V  V /| | || (__| | | |  __/ |    
+# |_.__/ \__,_|_|  |___/ \_/\_/ |_|\__\___|_| |_|\___|_|    
+#                                                           
+# by Stephan Raabe (2023) 
+# ----------------------------------------------------- 
+
+# ----------------------------------------------------- 
+# Load status bar information
+# ----------------------------------------------------- 
+bar=$(cat ~/.cache/.qtile_bar_x11.sh)
+
+# ----------------------------------------------------- 
+# Switch status bar information
+# ----------------------------------------------------- 
+if [ $bar == "qtile" ]; then
+    echo "Change to Polybar"
+    echo "polybar" > ~/.cache/.qtile_bar_x11.sh
+    notify-send "Status Bar is changing..." "to Polybar"
+else
+    echo "Change to Qtile Bar"
+    echo "qtile" > ~/.cache/.qtile_bar_x11.sh
+    notify-send "Status Bar is changing..." "to Qtile Status Bar"
+fi
+
+# ----------------------------------------------------- 
+# Load status bar
+# ----------------------------------------------------- 
+~/dotfiles/qtile/scripts/x11/loadbar.sh

qtile/scripts/x11/loadbar.sh

@@ -0,0 +1,43 @@
+#!/bin/bash
+#  _                 _ _                 
+# | | ___   __ _  __| | |__   __ _ _ __  
+# | |/ _ \ / _` |/ _` | '_ \ / _` | '__| 
+# | | (_) | (_| | (_| | |_) | (_| | |    
+# |_|\___/ \__,_|\__,_|_.__/ \__,_|_|    
+#                                        
+# by Stephan Raabe (2023) 
+# ----------------------------------------------------- 
+
+# ----------------------------------------------------- 
+# Check if information about the bar exists in .cache
+# If not create it
+# ----------------------------------------------------- 
+if [ ! -f ~/.cache/.qtile_bar_x11.sh ]; then
+    touch ~/.cache/.qtile_bar_x11.sh
+    echo "qtile" > ~/.cache/.qtile_bar_x11.sh
+    echo ".qtile_bar_x11.sh created"
+fi    
+
+# ----------------------------------------------------- 
+# Load status bar information
+# ----------------------------------------------------- 
+bar=$(cat ~/.cache/.qtile_bar_x11.sh)
+
+# ----------------------------------------------------- 
+# Load status bar based on loaded information
+# ----------------------------------------------------- 
+if [ $bar == "qtile" ]; then
+    killall polybar
+    sleep 0.2
+    qtile cmd-obj -o cmd -f reload_config
+else
+    killall polybar
+    sleep 0.2
+    qtile cmd-obj -o cmd -f reload_config
+    sleep 0.2
+    source "$HOME/.cache/wal/colors.sh"
+    ~/dotfiles/polybar/launch.sh &
+    sleep 0.2
+    qtile cmd-obj -o cmd -f reload_config
+fi
+

qtile/scripts/x11/screenshot.sh

@@ -18,7 +18,7 @@ option3="Fullscreen (delay 3 sec)"
 
 options="$option2\n$option3\n$option1"
 
-choice=$(echo -e "$options" | rofi -i -dmenu -config ~/dotfiles/rofi/config-screenshot.rasi -width 30 -p "Take Screenshot")
+choice=$(echo -e "$options" | rofi -i -dmenu -config ~/dotfiles/rofi/config-screenshot.rasi -width 30 -l 3 -p "Take Screenshot")
 
 case $choice in
     $option1)

qtile/scripts/x11/wallpaper.sh

@@ -9,17 +9,33 @@
 # by Stephan Raabe (2023) 
 # ----------------------------------------------------- 
 
-echo "Changing theme..."
+case $1 in
 
-# ----------------------------------------------------- 
+    # Load wallpaper from .cache of last session 
-# Update Wallpaper with pywal
+    "init")
-# ----------------------------------------------------- 
+        if [ -f ~/.cache/current_wallpaper.jpg ]; then
-wal -q -i ~/wallpaper/
+            wal -q -i ~/.cache/current_wallpaper.jpg
+        else
+            wal -q -i ~/wallpaper/
+        fi
+    ;;
 
-# ----------------------------------------------------- 
+    # Select wallpaper with rofi
-# Wait for 1 sec
+    "select")
-# ----------------------------------------------------- 
+        selected=$(ls -1 ~/wallpaper | grep "jpg" | rofi -dmenu -config ~/dotfiles/rofi/config-wallpaper.rasi)
-sleep 1
+        if [ ! "$selected" ]; then
+            echo "No wallpaper selected"
+            exit
+        fi
+        wal -q -i ~/wallpaper/$selected
+    ;;
+
+    # Randomly select wallpaper 
+    *)
+        wal -q -i ~/wallpaper/
+    ;;
+
+esac
 
 # ----------------------------------------------------- 
 # Reload qtile to color bar
@@ -30,6 +46,7 @@ qtile cmd-obj -o cmd -f reload_config
 # Get new theme
 # ----------------------------------------------------- 
 source "$HOME/.cache/wal/colors.sh"
+echo "Wallpaper: $wallpaper"
 newwall=$(echo $wallpaper | sed "s|$HOME/wallpaper/||g")
 
 # ----------------------------------------------------- 
@@ -43,5 +60,4 @@ sleep 1
 # Send notification
 # ----------------------------------------------------- 
 notify-send "Colors and Wallpaper updated" "with image $newwall"
-
 echo "Done."

ranger/commands.py

@@ -1,62 +0,0 @@
-# This is a sample commands.py.  You can add your own commands here.
-#
-# Please refer to commands_full.py for all the default commands and a complete
-# documentation.  Do NOT add them all here, or you may end up with defunct
-# commands when upgrading ranger.
-
-# A simple command for demonstration purposes follows.
-# -----------------------------------------------------------------------------
-
-from __future__ import (absolute_import, division, print_function)
-
-# You can import any python module as needed.
-import os
-
-# You always need to import ranger.api.commands here to get the Command class:
-from ranger.api.commands import Command
-
-
-# Any class that is a subclass of "Command" will be integrated into ranger as a
-# command.  Try typing ":my_edit<ENTER>" in ranger!
-class my_edit(Command):
-    # The so-called doc-string of the class will be visible in the built-in
-    # help that is accessible by typing "?c" inside ranger.
-    """:my_edit <filename>
-
-    A sample command for demonstration purposes that opens a file in an editor.
-    """
-
-    # The execute method is called when you run this command in ranger.
-    def execute(self):
-        # self.arg(1) is the first (space-separated) argument to the function.
-        # This way you can write ":my_edit somefilename<ENTER>".
-        if self.arg(1):
-            # self.rest(1) contains self.arg(1) and everything that follows
-            target_filename = self.rest(1)
-        else:
-            # self.fm is a ranger.core.filemanager.FileManager object and gives
-            # you access to internals of ranger.
-            # self.fm.thisfile is a ranger.container.file.File object and is a
-            # reference to the currently selected file.
-            target_filename = self.fm.thisfile.path
-
-        # This is a generic function to print text in ranger.
-        self.fm.notify("Let's edit the file " + target_filename + "!")
-
-        # Using bad=True in fm.notify allows you to print error messages:
-        if not os.path.exists(target_filename):
-            self.fm.notify("The given file does not exist!", bad=True)
-            return
-
-        # This executes a function from ranger.core.acitons, a module with a
-        # variety of subroutines that can help you construct commands.
-        # Check out the source, or run "pydoc ranger.core.actions" for a list.
-        self.fm.edit_file(target_filename)
-
-    # The tab method is called when you press tab, and should return a list of
-    # suggestions that the user will tab through.
-    # tabnum is 1 for <TAB> and -1 for <S-TAB> by default
-    def tab(self, tabnum):
-        # This is a generic tab-completion function that iterates through the
-        # content of the current directory.
-        return self._tab_directory_content()

ranger/rc.conf

@@ -1,769 +0,0 @@
-#  ____                              
-# |  _ \ __ _ _ __   __ _  ___ _ __  
-# | |_) / _` | '_ \ / _` |/ _ \ '__| 
-# |  _ < (_| | | | | (_| |  __/ |    
-# |_| \_\__,_|_| |_|\__, |\___|_|    
-#                   |___/            
-#  
-# by Stephan Raabe (2023) 
-# ----------------------------------------------------- 
-#
-# ===================================================================
-# This file contains the default startup commands for ranger.
-# To change them, it is recommended to create either /etc/ranger/rc.conf
-# (system-wide) or ~/.config/ranger/rc.conf (per user) and add your custom
-# commands there.
-#
-# If you copy this whole file there, you may want to set the environment
-# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
-#
-# The purpose of this file is mainly to define keybindings and settings.
-# For running more complex python code, please create a plugin in "plugins/" or
-# a command in "commands.py".
-#
-# Each line is a command that will be run before the user interface
-# is initialized.  As a result, you can not use commands which rely
-# on the UI such as :delete or :mark.
-# ===================================================================
-
-# ===================================================================
-# == Options
-# ===================================================================
-
-# Which viewmode should be used?  Possible values are:
-#     miller: Use miller columns which show multiple levels of the hierarchy
-#     multipane: Midnight-commander like multipane view showing all tabs next
-#                to each other
-set viewmode miller
-#set viewmode multipane
-
-# How many columns are there, and what are their relative widths?
-set column_ratios 1,3,4
-
-# Which files should be hidden? (regular expression)
-set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
-
-# Show hidden files? You can toggle this by typing 'zh'
-set show_hidden false
-
-# Ask for a confirmation when running the "delete" command?
-# Valid values are "always", "never", "multiple" (default)
-# With "multiple", ranger will ask only if you delete multiple files at once.
-set confirm_on_delete multiple
-
-# Use non-default path for file preview script?
-# ranger ships with scope.sh, a script that calls external programs (see
-# README.md for dependencies) to preview images, archives, etc.
-#set preview_script ~/.config/ranger/scope.sh
-
-# Use the external preview script or display simple plain text or image previews?
-set use_preview_script true
-
-# Automatically count files in the directory, even before entering them?
-set automatically_count_files true
-
-# Open all images in this directory when running certain image viewers
-# like feh or sxiv?  You can still open selected files by marking them.
-set open_all_images true
-
-# Be aware of version control systems and display information.
-set vcs_aware false
-
-# State of the four backends git, hg, bzr, svn. The possible states are
-# disabled, local (only show local info), enabled (show local and remote
-# information).
-set vcs_backend_git enabled
-set vcs_backend_hg disabled
-set vcs_backend_bzr disabled
-set vcs_backend_svn disabled
-
-# Truncate the long commit messages to this length when shown in the statusbar.
-set vcs_msg_length 50
-
-# Use one of the supported image preview protocols
-set preview_images true
-
-# Set the preview image method. Supported methods:
-#
-# * w3m (default):
-#   Preview images in full color with the external command "w3mimgpreview"?
-#   This requires the console web browser "w3m" and a supported terminal.
-#   It has been successfully tested with "xterm" and "urxvt" without tmux.
-#
-# * iterm2:
-#   Preview images in full color using iTerm2 image previews
-#   (http://iterm2.com/images.html). This requires using iTerm2 compiled
-#   with image preview support.
-#
-#   This feature relies on the dimensions of the terminal's font.  By default, a
-#   width of 8 and height of 11 are used.  To use other values, set the options
-#   iterm2_font_width and iterm2_font_height to the desired values.
-#
-# * terminology:
-#   Previews images in full color in the terminology terminal emulator.
-#   Supports a wide variety of formats, even vector graphics like svg.
-#
-# * urxvt:
-#   Preview images in full color using urxvt image backgrounds. This
-#   requires using urxvt compiled with pixbuf support.
-#
-# * urxvt-full:
-#   The same as urxvt but utilizing not only the preview pane but the
-#   whole terminal window.
-#
-# * kitty:
-#   Preview images in full color using kitty image protocol.
-#   Requires python PIL or pillow library.
-#   If ranger does not share the local filesystem with kitty
-#   the transfer method is changed to encode the whole image;
-#   while slower, this allows remote previews,
-#   for example during an ssh session.
-#   Tmux is unsupported.
-#
-# * ueberzug:
-#   Preview images in full color with the external command "ueberzug".
-#   Images are shown by using a child window.
-#   Only for users who run X11 in GNU/Linux.
-set preview_images_method ueberzug
-
-# Delay in seconds before displaying an image with the w3m method.
-# Increase it in case of experiencing display corruption.
-set w3m_delay 0.02
-
-# Manually adjust the w3mimg offset when using a terminal which needs this
-set w3m_offset 0
-
-# Default iTerm2 font size (see: preview_images_method: iterm2)
-set iterm2_font_width 8
-set iterm2_font_height 11
-
-# Use a unicode "..." character to mark cut-off filenames?
-set unicode_ellipsis false
-
-# BIDI support - try to properly display file names in RTL languages (Hebrew, Arabic).
-# Requires the python-bidi pip package
-set bidi_support false
-
-# Show dotfiles in the bookmark preview box?
-set show_hidden_bookmarks true
-
-# Which colorscheme to use?  These colorschemes are available by default:
-# default, jungle, snow, solarized
-set colorscheme default
-
-# Preview files on the rightmost column?
-# And collapse (shrink) the last column if there is nothing to preview?
-set preview_files true
-set preview_directories true
-set collapse_preview true
-
-# Wrap long lines in plain text previews?
-set wrap_plaintext_previews false
-
-# Save the console history on exit?
-set save_console_history true
-
-# Draw the status bar on top of the browser window (default: bottom)
-set status_bar_on_top false
-
-# Draw a progress bar in the status bar which displays the average state of all
-# currently running tasks which support progress bars?
-set draw_progress_bar_in_status_bar true
-
-# Draw borders around columns? (separators, outline, both, or none)
-# Separators are vertical lines between columns.
-# Outline draws a box around all the columns.
-# Both combines the two.
-set draw_borders none
-
-# Display the directory name in tabs?
-set dirname_in_tabs false
-
-# Enable the mouse support?
-set mouse_enabled true
-
-# Display the file size in the main column or status bar?
-set display_size_in_main_column true
-set display_size_in_status_bar true
-
-# Display the free disk space in the status bar?
-set display_free_space_in_status_bar true
-
-# Display files tags in all columns or only in main column?
-set display_tags_in_all_columns true
-
-# Set a title for the window? Updates both `WM_NAME` and `WM_ICON_NAME`
-set update_title false
-
-# Set the tmux/screen window-name to "ranger"?
-set update_tmux_title true
-
-# Shorten the title if it gets long?  The number defines how many
-# directories are displayed at once, 0 turns off this feature.
-set shorten_title 3
-
-# Show hostname in titlebar?
-set hostname_in_titlebar true
-
-# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
-set tilde_in_titlebar false
-
-# How many directory-changes or console-commands should be kept in history?
-set max_history_size 20
-set max_console_history_size 50
-
-# Try to keep so much space between the top/bottom border when scrolling:
-set scroll_offset 8
-
-# Flush the input after each key hit?  (Noticeable when ranger lags)
-set flushinput true
-
-# Padding on the right when there's no preview?
-# This allows you to click into the space to run the file.
-set padding_right true
-
-# Save bookmarks (used with mX and `X) instantly?
-# This helps to synchronize bookmarks between multiple ranger
-# instances but leads to *slight* performance loss.
-# When false, bookmarks are saved when ranger is exited.
-set autosave_bookmarks true
-
-# Save the "`" bookmark to disk.  This can be used to switch to the last
-# directory by typing "``".
-set save_backtick_bookmark true
-
-# You can display the "real" cumulative size of directories by using the
-# command :get_cumulative_size or typing "dc".  The size is expensive to
-# calculate and will not be updated automatically.  You can choose
-# to update it automatically though by turning on this option:
-set autoupdate_cumulative_size false
-
-# Turning this on makes sense for screen readers:
-set show_cursor false
-
-# One of: size, natural, basename, atime, ctime, mtime, type, random
-set sort natural
-
-# Additional sorting options
-set sort_reverse false
-set sort_case_insensitive true
-set sort_directories_first true
-set sort_unicode false
-
-# Enable this if key combinations with the Alt Key don't work for you.
-# (Especially on xterm)
-set xterm_alt_key false
-
-# Whether to include bookmarks in cd command
-set cd_bookmarks true
-
-# Changes case sensitivity for the cd command tab completion
-set cd_tab_case sensitive
-
-# Use fuzzy tab completion with the "cd" command. For example,
-# ":cd /u/lo/b<tab>" expands to ":cd /usr/local/bin".
-set cd_tab_fuzzy false
-
-# Avoid previewing files larger than this size, in bytes.  Use a value of 0 to
-# disable this feature.
-set preview_max_size 0
-
-# The key hint lists up to this size have their sublists expanded.
-# Otherwise the submaps are replaced with "...".
-set hint_collapse_threshold 10
-
-# Add the highlighted file to the path in the titlebar
-set show_selection_in_titlebar true
-
-# The delay that ranger idly waits for user input, in milliseconds, with a
-# resolution of 100ms.  Lower delay reduces lag between directory updates but
-# increases CPU load.
-set idle_delay 2000
-
-# When the metadata manager module looks for metadata, should it only look for
-# a ".metadata.json" file in the current directory, or do a deep search and
-# check all directories above the current one as well?
-set metadata_deep_search false
-
-# Clear all existing filters when leaving a directory
-set clear_filters_on_dir_change false
-
-# Disable displaying line numbers in main column.
-# Possible values: false, absolute, relative.
-set line_numbers false
-
-# When line_numbers=relative show the absolute line number in the
-# current line.
-set relative_current_zero false
-
-# Start line numbers from 1 instead of 0
-set one_indexed false
-
-# Save tabs on exit
-set save_tabs_on_exit false
-
-# Enable scroll wrapping - moving down while on the last item will wrap around to
-# the top and vice versa.
-set wrap_scroll false
-
-# Set the global_inode_type_filter to nothing.  Possible options: d, f and l for
-# directories, files and symlinks respectively.
-set global_inode_type_filter
-
-# This setting allows to freeze the list of files to save I/O bandwidth.  It
-# should be 'false' during start-up, but you can toggle it by pressing F.
-set freeze_files false
-
-# Print file sizes in bytes instead of the default human-readable format.
-set size_in_bytes false
-
-# Warn at startup if RANGER_LEVEL env var is greater than 0, in other words
-# give a warning when you nest ranger in a subshell started by ranger.
-# Special value "error" makes the warning more visible.
-set nested_ranger_warning true
-
-# ===================================================================
-# == Local Options
-# ===================================================================
-# You can set local options that only affect a single directory.
-
-# Examples:
-# setlocal path=~/downloads sort mtime
-
-# ===================================================================
-# == Command Aliases in the Console
-# ===================================================================
-
-alias e     edit
-alias q     quit
-alias q!    quit!
-alias qa    quitall
-alias qa!   quitall!
-alias qall  quitall
-alias qall! quitall!
-alias setl  setlocal
-
-alias filter     scout -prts
-alias find       scout -aets
-alias mark       scout -mr
-alias unmark     scout -Mr
-alias search     scout -rs
-alias search_inc scout -rts
-alias travel     scout -aefklst
-
-# ===================================================================
-# == Define keys for the browser
-# ===================================================================
-
-# Basic
-map     Q quitall
-map     q quit
-copymap q ZZ ZQ
-
-map R     reload_cwd
-map F     set freeze_files!
-map <C-r> reset
-map <C-l> redraw_window
-map <C-c> abort
-map <esc> change_mode normal
-map ~ set viewmode!
-
-map i display_file
-map <A-j> scroll_preview 1
-map <A-k> scroll_preview -1
-map ? help
-map W display_log
-map w taskview_open
-map S shell $SHELL
-
-map :  console
-map ;  console
-map !  console shell%space
-map @  console -p6 shell  %%s
-map #  console shell -p%space
-map s  console shell%space
-map r  chain draw_possible_programs; console open_with%space
-map f  console find%space
-map cd console cd%space
-
-map <C-p> chain console; eval fm.ui.console.history_move(-1)
-
-# Change the line mode
-map Mf linemode filename
-map Mi linemode fileinfo
-map Mm linemode mtime
-map Mh linemode humanreadablemtime
-map Mp linemode permissions
-map Ms linemode sizemtime
-map MH linemode sizehumanreadablemtime
-map Mt linemode metatitle
-
-# Tagging / Marking
-map t       tag_toggle
-map ut      tag_remove
-map "<any>  tag_toggle tag=%any
-map <Space> mark_files toggle=True
-map v       mark_files all=True toggle=True
-map uv      mark_files all=True val=False
-map V       toggle_visual_mode
-map uV      toggle_visual_mode reverse=True
-
-# For the nostalgics: Midnight Commander bindings
-map <F1> help
-map <F2> rename_append
-map <F3> display_file
-map <F4> edit
-map <F5> copy
-map <F6> cut
-map <F7> console mkdir%space
-map <F8> console delete
-#map <F8> console trash
-map <F10> exit
-
-# In case you work on a keyboard with dvorak layout
-map <UP>       move up=1
-map <DOWN>     move down=1
-map <LEFT>     move left=1
-map <RIGHT>    move right=1
-map <HOME>     move to=0
-map <END>      move to=-1
-map <PAGEDOWN> move down=1   pages=True
-map <PAGEUP>   move up=1     pages=True
-map <CR>       move right=1
-#map <DELETE>   console delete
-map <INSERT>   console touch%space
-
-# VIM-like
-copymap <UP>       k
-copymap <DOWN>     j
-copymap <LEFT>     h
-copymap <RIGHT>    l
-copymap <HOME>     gg
-copymap <END>      G
-copymap <PAGEDOWN> <C-F>
-copymap <PAGEUP>   <C-B>
-
-map J  move down=0.5  pages=True
-map K  move up=0.5    pages=True
-copymap J <C-D>
-copymap K <C-U>
-
-# Jumping around
-map H     history_go -1
-map L     history_go 1
-map ]     move_parent 1
-map [     move_parent -1
-map }     traverse
-map {     traverse_backwards
-map )     jump_non
-
-map gh cd ~
-map ge cd /etc
-map gu cd /usr
-map gd cd /dev
-map gl cd -r .
-map gL cd -r %f
-map go cd /opt
-map gv cd /var
-map gm cd /media
-map gi eval fm.cd('/run/media/' + os.getenv('USER'))
-map gM cd /mnt
-map gs cd /srv
-map gp cd /tmp
-map gr cd /
-map gR eval fm.cd(ranger.RANGERDIR)
-map g/ cd /
-map g? cd /usr/share/doc/ranger
-
-# External Programs
-map E  edit
-map du shell -p du --max-depth=1 -h --apparent-size
-map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
-map yp yank path
-map yd yank dir
-map yn yank name
-map y. yank name_without_extension
-
-# Filesystem Operations
-map =  chmod
-
-map cw console rename%space
-map a  rename_append
-map A  eval fm.open_console('rename ' + fm.thisfile.relative_path.replace("%", "%%"))
-map I  eval fm.open_console('rename ' + fm.thisfile.relative_path.replace("%", "%%"), position=7)
-
-map pp paste
-map po paste overwrite=True
-map pP paste append=True
-map pO paste overwrite=True append=True
-map pl paste_symlink relative=False
-map pL paste_symlink relative=True
-map phl paste_hardlink
-map pht paste_hardlinked_subtree
-map pd console paste dest=
-map p`<any> paste dest=%any_path
-map p'<any> paste dest=%any_path
-
-map dD console delete
-map dT console trash
-
-map dd cut
-map ud uncut
-map da cut mode=add
-map dr cut mode=remove
-map dt cut mode=toggle
-
-map yy copy
-map uy uncut
-map ya copy mode=add
-map yr copy mode=remove
-map yt copy mode=toggle
-
-# Temporary workarounds
-map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
-map dG  eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
-map dj  eval fm.cut(dirarg=dict(down=1), narg=quantifier)
-map dk  eval fm.cut(dirarg=dict(up=1), narg=quantifier)
-map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
-map yG  eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
-map yj  eval fm.copy(dirarg=dict(down=1), narg=quantifier)
-map yk  eval fm.copy(dirarg=dict(up=1), narg=quantifier)
-
-# Searching
-map /  console search%space
-map n  search_next
-map N  search_next forward=False
-map ct search_next order=tag
-map cs search_next order=size
-map ci search_next order=mimetype
-map cc search_next order=ctime
-map cm search_next order=mtime
-map ca search_next order=atime
-
-# Tabs
-map <C-n>     tab_new
-map <C-w>     tab_close
-map <TAB>     tab_move 1
-map <S-TAB>   tab_move -1
-map <A-Right> tab_move 1
-map <A-Left>  tab_move -1
-map gt        tab_move 1
-map gT        tab_move -1
-map gn        tab_new
-map gc        tab_close
-map uq        tab_restore
-map <a-1>     tab_open 1
-map <a-2>     tab_open 2
-map <a-3>     tab_open 3
-map <a-4>     tab_open 4
-map <a-5>     tab_open 5
-map <a-6>     tab_open 6
-map <a-7>     tab_open 7
-map <a-8>     tab_open 8
-map <a-9>     tab_open 9
-map <a-r>     tab_shift 1
-map <a-l>     tab_shift -1
-
-# Sorting
-map or set sort_reverse!
-map oz set sort=random
-map os chain set sort=size;      set sort_reverse=False
-map ob chain set sort=basename;  set sort_reverse=False
-map on chain set sort=natural;   set sort_reverse=False
-map om chain set sort=mtime;     set sort_reverse=False
-map oc chain set sort=ctime;     set sort_reverse=False
-map oa chain set sort=atime;     set sort_reverse=False
-map ot chain set sort=type;      set sort_reverse=False
-map oe chain set sort=extension; set sort_reverse=False
-
-map oS chain set sort=size;      set sort_reverse=True
-map oB chain set sort=basename;  set sort_reverse=True
-map oN chain set sort=natural;   set sort_reverse=True
-map oM chain set sort=mtime;     set sort_reverse=True
-map oC chain set sort=ctime;     set sort_reverse=True
-map oA chain set sort=atime;     set sort_reverse=True
-map oT chain set sort=type;      set sort_reverse=True
-map oE chain set sort=extension; set sort_reverse=True
-
-map dc get_cumulative_size
-
-# Settings
-map zc    set collapse_preview!
-map zd    set sort_directories_first!
-map zh    set show_hidden!
-map <C-h> set show_hidden!
-copymap <C-h> <backspace>
-copymap <backspace> <backspace2>
-map zI    set flushinput!
-map zi    set preview_images!
-map zm    set mouse_enabled!
-map zp    set preview_files!
-map zP    set preview_directories!
-map zs    set sort_case_insensitive!
-map zu    set autoupdate_cumulative_size!
-map zv    set use_preview_script!
-map zf    console filter%space
-copymap zf zz
-
-# Filter stack
-map .d filter_stack add type d
-map .f filter_stack add type f
-map .l filter_stack add type l
-map .m console filter_stack add mime%space
-map .n console filter_stack add name%space
-map .# console filter_stack add hash%space
-map ." filter_stack add duplicate
-map .' filter_stack add unique
-map .| filter_stack add or
-map .& filter_stack add and
-map .! filter_stack add not
-map .r filter_stack rotate
-map .c filter_stack clear
-map .* filter_stack decompose
-map .p filter_stack pop
-map .. filter_stack show
-
-# Bookmarks
-map `<any>  enter_bookmark %any
-map '<any>  enter_bookmark %any
-map m<any>  set_bookmark %any
-map um<any> unset_bookmark %any
-
-map m<bg>   draw_bookmarks
-copymap m<bg>  um<bg> `<bg> '<bg>
-
-# Generate all the chmod bindings with some python help:
-eval for arg in "rwxXst": cmd("map +u{0} shell -f chmod u+{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map +g{0} shell -f chmod g+{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map +o{0} shell -f chmod o+{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map +a{0} shell -f chmod a+{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map +{0}  shell -f chmod u+{0} %s".format(arg))
-
-eval for arg in "rwxXst": cmd("map -u{0} shell -f chmod u-{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map -g{0} shell -f chmod g-{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map -o{0} shell -f chmod o-{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map -a{0} shell -f chmod a-{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map -{0}  shell -f chmod u-{0} %s".format(arg))
-
-# ===================================================================
-# == Define keys for the console
-# ===================================================================
-# Note: Unmapped keys are passed directly to the console.
-
-# Basic
-cmap <tab>   eval fm.ui.console.tab()
-cmap <s-tab> eval fm.ui.console.tab(-1)
-cmap <ESC>   eval fm.ui.console.close()
-cmap <CR>    eval fm.ui.console.execute()
-cmap <C-l>   redraw_window
-
-copycmap <ESC> <C-c>
-copycmap <CR>  <C-j>
-
-# Move around
-cmap <up>    eval fm.ui.console.history_move(-1)
-cmap <down>  eval fm.ui.console.history_move(1)
-cmap <left>  eval fm.ui.console.move(left=1)
-cmap <right> eval fm.ui.console.move(right=1)
-cmap <home>  eval fm.ui.console.move(right=0, absolute=True)
-cmap <end>   eval fm.ui.console.move(right=-1, absolute=True)
-cmap <a-b> eval fm.ui.console.move_word(left=1)
-cmap <a-f> eval fm.ui.console.move_word(right=1)
-
-copycmap <a-b> <a-left>
-copycmap <a-f> <a-right>
-
-# Line Editing
-cmap <backspace>  eval fm.ui.console.delete(-1)
-cmap <delete>     eval fm.ui.console.delete(0)
-cmap <C-w>        eval fm.ui.console.delete_word()
-cmap <A-d>        eval fm.ui.console.delete_word(backward=False)
-cmap <C-k>        eval fm.ui.console.delete_rest(1)
-cmap <C-u>        eval fm.ui.console.delete_rest(-1)
-cmap <C-y>        eval fm.ui.console.paste()
-
-# And of course the emacs way
-copycmap <ESC>       <C-g>
-copycmap <up>        <C-p>
-copycmap <down>      <C-n>
-copycmap <left>      <C-b>
-copycmap <right>     <C-f>
-copycmap <home>      <C-a>
-copycmap <end>       <C-e>
-copycmap <delete>    <C-d>
-copycmap <backspace> <C-h>
-
-# Note: There are multiple ways to express backspaces.  <backspace> (code 263)
-# and <backspace2> (code 127).  To be sure, use both.
-copycmap <backspace> <backspace2>
-
-# This special expression allows typing in numerals:
-cmap <allow_quantifiers> false
-
-# ===================================================================
-# == Pager Keybindings
-# ===================================================================
-
-# Movement
-pmap  <down>      pager_move  down=1
-pmap  <up>        pager_move  up=1
-pmap  <left>      pager_move  left=4
-pmap  <right>     pager_move  right=4
-pmap  <home>      pager_move  to=0
-pmap  <end>       pager_move  to=-1
-pmap  <pagedown>  pager_move  down=1.0  pages=True
-pmap  <pageup>    pager_move  up=1.0    pages=True
-pmap  <C-d>       pager_move  down=0.5  pages=True
-pmap  <C-u>       pager_move  up=0.5    pages=True
-
-copypmap <UP>       k  <C-p>
-copypmap <DOWN>     j  <C-n> <CR>
-copypmap <LEFT>     h
-copypmap <RIGHT>    l
-copypmap <HOME>     g
-copypmap <END>      G
-copypmap <C-d>      d
-copypmap <C-u>      u
-copypmap <PAGEDOWN> n  f  <C-F>  <Space>
-copypmap <PAGEUP>   p  b  <C-B>
-
-# Basic
-pmap     <C-l> redraw_window
-pmap     <ESC> pager_close
-copypmap <ESC> q Q i <F3>
-pmap E      edit_file
-
-# ===================================================================
-# == Taskview Keybindings
-# ===================================================================
-
-# Movement
-tmap <up>        taskview_move up=1
-tmap <down>      taskview_move down=1
-tmap <home>      taskview_move to=0
-tmap <end>       taskview_move to=-1
-tmap <pagedown>  taskview_move down=1.0  pages=True
-tmap <pageup>    taskview_move up=1.0    pages=True
-tmap <C-d>       taskview_move down=0.5  pages=True
-tmap <C-u>       taskview_move up=0.5    pages=True
-
-copytmap <UP>       k  <C-p>
-copytmap <DOWN>     j  <C-n> <CR>
-copytmap <HOME>     g
-copytmap <END>      G
-copytmap <C-u>      u
-copytmap <PAGEDOWN> n  f  <C-F>  <Space>
-copytmap <PAGEUP>   p  b  <C-B>
-
-# Changing priority and deleting tasks
-tmap J          eval -q fm.ui.taskview.task_move(-1)
-tmap K          eval -q fm.ui.taskview.task_move(0)
-tmap dd         eval -q fm.ui.taskview.task_remove()
-tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
-tmap <pageup>   eval -q fm.ui.taskview.task_move(0)
-tmap <delete>   eval -q fm.ui.taskview.task_remove()
-
-# Basic
-tmap <C-l> redraw_window
-tmap <ESC> taskview_close
-copytmap <ESC> q Q w <C-c>

ranger/rifle.conf

@@ -1,284 +0,0 @@
-# vim: ft=cfg
-#
-# This is the configuration file of "rifle", ranger's file executor/opener.
-# Each line consists of conditions and a command.  For each line the conditions
-# are checked and if they are met, the respective command is run.
-#
-# Syntax:
-#   <condition1> , <condition2> , ... = command
-#
-# The command can contain these environment variables:
-#   $1-$9 | The n-th selected file
-#   $@    | All selected files
-#
-# If you use the special command "ask", rifle will ask you what program to run.
-#
-# Prefixing a condition with "!" will negate its result.
-# These conditions are currently supported:
-#   match <regexp> | The regexp matches $1
-#   ext <regexp>   | The regexp matches the extension of $1
-#   mime <regexp>  | The regexp matches the mime type of $1
-#   name <regexp>  | The regexp matches the basename of $1
-#   path <regexp>  | The regexp matches the absolute path of $1
-#   has <program>  | The program is installed (i.e. located in $PATH)
-#   env <variable> | The environment variable "variable" is non-empty
-#   file           | $1 is a file
-#   directory      | $1 is a directory
-#   number <n>     | change the number of this command to n
-#   terminal       | stdin, stderr and stdout are connected to a terminal
-#   X              | A graphical environment is available (darwin, Xorg, or Wayland)
-#
-# There are also pseudo-conditions which have a "side effect":
-#   flag <flags>  | Change how the program is run. See below.
-#   label <label> | Assign a label or name to the command so it can
-#                 | be started with :open_with <label> in ranger
-#                 | or `rifle -p <label>` in the standalone executable.
-#   else          | Always true.
-#
-# Flags are single characters which slightly transform the command:
-#   f | Fork the program, make it run in the background.
-#     |   New command = setsid $command >& /dev/null &
-#   r | Execute the command with root permissions
-#     |   New command = sudo $command
-#   t | Run the program in a new terminal.  If $TERMCMD is not defined,
-#     | rifle will attempt to extract it from $TERM.
-#     |   New command = $TERMCMD -e $command
-# Note: The "New command" serves only as an illustration, the exact
-# implementation may differ.
-# Note: When using rifle in ranger, there is an additional flag "c" for
-# only running the current file even if you have marked multiple files.
-
-#-------------------------------------------
-# Websites
-#-------------------------------------------
-# Rarely installed browsers get higher priority; It is assumed that if you
-# install a rare browser, you probably use it.  Firefox/konqueror/w3m on the
-# other hand are often only installed as fallback browsers.
-ext x?html?, has surf,             X, flag f = surf -- file://"$1"
-ext x?html?, has vimprobable,      X, flag f = vimprobable -- "$@"
-ext x?html?, has vimprobable2,     X, flag f = vimprobable2 -- "$@"
-ext x?html?, has qutebrowser,      X, flag f = qutebrowser -- "$@"
-ext x?html?, has dwb,              X, flag f = dwb -- "$@"
-ext x?html?, has jumanji,          X, flag f = jumanji -- "$@"
-ext x?html?, has luakit,           X, flag f = luakit -- "$@"
-ext x?html?, has uzbl,             X, flag f = uzbl -- "$@"
-ext x?html?, has uzbl-tabbed,      X, flag f = uzbl-tabbed -- "$@"
-ext x?html?, has uzbl-browser,     X, flag f = uzbl-browser -- "$@"
-ext x?html?, has uzbl-core,        X, flag f = uzbl-core -- "$@"
-ext x?html?, has midori,           X, flag f = midori -- "$@"
-ext x?html?, has opera,            X, flag f = opera -- "$@"
-ext x?html?, has firefox,          X, flag f = firefox -- "$@"
-ext x?html?, has seamonkey,        X, flag f = seamonkey -- "$@"
-ext x?html?, has iceweasel,        X, flag f = iceweasel -- "$@"
-ext x?html?, has chromium-browser, X, flag f = chromium-browser -- "$@"
-ext x?html?, has chromium,         X, flag f = chromium -- "$@"
-ext x?html?, has google-chrome,    X, flag f = google-chrome -- "$@"
-ext x?html?, has epiphany,         X, flag f = epiphany -- "$@"
-ext x?html?, has konqueror,        X, flag f = konqueror -- "$@"
-ext x?html?, has elinks,            terminal = elinks "$@"
-ext x?html?, has links2,            terminal = links2 "$@"
-ext x?html?, has links,             terminal = links "$@"
-ext x?html?, has lynx,              terminal = lynx -- "$@"
-ext x?html?, has w3m,               terminal = w3m "$@"
-
-#-------------------------------------------
-# Misc
-#-------------------------------------------
-# Define the "editor" for text files as first action
-mime ^text,  label editor = ${VISUAL:-$EDITOR} -- "$@"
-mime ^text,  label pager  = "$PAGER" -- "$@"
-!mime ^text, label editor, ext xml|json|csv|tex|py|pl|rb|js|sh|php = ${VISUAL:-$EDITOR} -- "$@"
-!mime ^text, label pager,  ext xml|json|csv|tex|py|pl|rb|js|sh|php = "$PAGER" -- "$@"
-
-ext 1                         = man "$1"
-ext s[wmf]c, has zsnes, X     = zsnes "$1"
-ext s[wmf]c, has snes9x-gtk,X = snes9x-gtk "$1"
-ext nes, has fceux, X         = fceux "$1"
-ext exe                       = wine "$1"
-name ^[mM]akefile$            = make
-
-#--------------------------------------------
-# Scripts
-#-------------------------------------------
-ext py  = python -- "$1"
-ext pl  = perl -- "$1"
-ext rb  = ruby -- "$1"
-ext js  = node -- "$1"
-ext sh  = sh -- "$1"
-ext php = php -- "$1"
-
-#--------------------------------------------
-# Audio without X
-#-------------------------------------------
-mime ^audio|ogg$, terminal, has mpv      = mpv -- "$@"
-mime ^audio|ogg$, terminal, has mplayer2 = mplayer2 -- "$@"
-mime ^audio|ogg$, terminal, has mplayer  = mplayer -- "$@"
-ext midi?,        terminal, has wildmidi = wildmidi -- "$@"
-
-#--------------------------------------------
-# Video/Audio with a GUI
-#-------------------------------------------
-mime ^video|audio, has gmplayer, X, flag f = gmplayer -- "$@"
-mime ^video|audio, has smplayer, X, flag f = smplayer "$@"
-mime ^video,       has mpv,      X, flag f = mpv -- "$@"
-mime ^video,       has mpv,      X, flag f = mpv --fs -- "$@"
-mime ^video,       has mplayer2, X, flag f = mplayer2 -- "$@"
-mime ^video,       has mplayer2, X, flag f = mplayer2 -fs -- "$@"
-mime ^video,       has mplayer,  X, flag f = mplayer -- "$@"
-mime ^video,       has mplayer,  X, flag f = mplayer -fs -- "$@"
-mime ^video|audio, has vlc,      X, flag f = vlc -- "$@"
-mime ^video|audio, has totem,    X, flag f = totem -- "$@"
-mime ^video|audio, has totem,    X, flag f = totem --fullscreen -- "$@"
-
-#--------------------------------------------
-# Video without X
-#-------------------------------------------
-mime ^video, terminal, !X, has mpv       = mpv -- "$@"
-mime ^video, terminal, !X, has mplayer2  = mplayer2 -- "$@"
-mime ^video, terminal, !X, has mplayer   = mplayer -- "$@"
-
-#-------------------------------------------
-# Documents
-#-------------------------------------------
-ext pdf, has llpp,     X, flag f = llpp "$@"
-ext pdf, has zathura,  X, flag f = zathura -- "$@"
-ext pdf, has mupdf,    X, flag f = mupdf "$@"
-ext pdf, has mupdf-x11,X, flag f = mupdf-x11 "$@"
-ext pdf, has apvlv,    X, flag f = apvlv -- "$@"
-ext pdf, has xpdf,     X, flag f = xpdf -- "$@"
-ext pdf, has evince,   X, flag f = evince -- "$@"
-ext pdf, has atril,    X, flag f = atril -- "$@"
-ext pdf, has okular,   X, flag f = okular -- "$@"
-ext pdf, has epdfview, X, flag f = epdfview -- "$@"
-ext pdf, has qpdfview, X, flag f = qpdfview "$@"
-ext pdf, has open,     X, flag f = open "$@"
-
-ext docx?, has catdoc,       terminal = catdoc -- "$@" | "$PAGER"
-
-ext                        sxc|xlsx?|xlt|xlw|gnm|gnumeric, has gnumeric,    X, flag f = gnumeric -- "$@"
-ext                        sxc|xlsx?|xlt|xlw|gnm|gnumeric, has kspread,     X, flag f = kspread -- "$@"
-ext pptx?|od[dfgpst]|docx?|sxc|xlsx?|xlt|xlw|gnm|gnumeric, has libreoffice, X, flag f = libreoffice "$@"
-ext pptx?|od[dfgpst]|docx?|sxc|xlsx?|xlt|xlw|gnm|gnumeric, has soffice,     X, flag f = soffice "$@"
-ext pptx?|od[dfgpst]|docx?|sxc|xlsx?|xlt|xlw|gnm|gnumeric, has ooffice,     X, flag f = ooffice "$@"
-
-ext djvu, has zathura,X, flag f = zathura -- "$@"
-ext djvu, has evince, X, flag f = evince -- "$@"
-ext djvu, has atril,  X, flag f = atril -- "$@"
-ext djvu, has djview, X, flag f = djview -- "$@"
-
-ext epub, has ebook-viewer, X, flag f = ebook-viewer -- "$@"
-ext epub, has zathura,      X, flag f = zathura -- "$@"
-ext epub, has mupdf,        X, flag f = mupdf -- "$@"
-ext mobi, has ebook-viewer, X, flag f = ebook-viewer -- "$@"
-
-ext cbr,  has zathura,      X, flag f = zathura -- "$@"
-ext cbz,  has zathura,      X, flag f = zathura -- "$@"
-
-#-------------------------------------------
-# Images
-#-------------------------------------------
-mime ^image/svg, has inkscape, X, flag f = inkscape -- "$@"
-mime ^image/svg, has display,  X, flag f = display -- "$@"
-
-mime ^image, has imv,       X, flag f = imv -- "$@"
-mime ^image, has pqiv,      X, flag f = pqiv -- "$@"
-mime ^image, has sxiv,      X, flag f = sxiv -- "$@"
-mime ^image, has feh,       X, flag f = feh -- "$@"
-mime ^image, has mirage,    X, flag f = mirage -- "$@"
-mime ^image, has ristretto, X, flag f = ristretto "$@"
-mime ^image, has eog,       X, flag f = eog -- "$@"
-mime ^image, has eom,       X, flag f = eom -- "$@"
-mime ^image, has nomacs,    X, flag f = nomacs -- "$@"
-mime ^image, has geeqie,    X, flag f = geeqie -- "$@"
-mime ^image, has gpicview,  X, flag f = gpicview -- "$@"
-mime ^image, has gwenview,  X, flag f = gwenview -- "$@"
-mime ^image, has gimp,      X, flag f = gimp -- "$@"
-ext xcf,                    X, flag f = gimp -- "$@"
-
-#-------------------------------------------
-# Archives
-#-------------------------------------------
-
-# avoid password prompt by providing empty password
-ext 7z, has 7z = 7z -p l "$@" | "$PAGER"
-# This requires atool
-ext ace|ar|arc|bz2?|cab|cpio|cpt|deb|dgc|dmg|gz,     has atool = atool --list --each -- "$@" | "$PAGER"
-ext iso|jar|msi|pkg|rar|shar|tar|tgz|xar|xpi|xz|zip, has atool = atool --list --each -- "$@" | "$PAGER"
-ext 7z|ace|ar|arc|bz2?|cab|cpio|cpt|deb|dgc|dmg|gz,  has atool = atool --extract --each -- "$@"
-ext iso|jar|msi|pkg|rar|shar|tar|tgz|xar|xpi|xz|zip, has atool = atool --extract --each -- "$@"
-
-# Listing and extracting archives without atool:
-ext tar|gz|bz2|xz, has tar = tar vvtf "$1" | "$PAGER"
-ext tar|gz|bz2|xz, has tar = for file in "$@"; do tar vvxf "$file"; done
-ext bz2, has bzip2 = for file in "$@"; do bzip2 -dk "$file"; done
-ext zip, has unzip = unzip -l "$1" | less
-ext zip, has unzip = for file in "$@"; do unzip -d "${file%.*}" "$file"; done
-ext ace, has unace = unace l "$1" | less
-ext ace, has unace = for file in "$@"; do unace e "$file"; done
-ext rar, has unrar = unrar l "$1" | less
-ext rar, has unrar = for file in "$@"; do unrar x "$file"; done
-
-#-------------------------------------------
-# Fonts
-#-------------------------------------------
-mime ^font, has fontforge, X, flag f = fontforge "$@"
-
-#-------------------------------------------
-# Flag t fallback terminals
-#-------------------------------------------
-# Rarely installed terminal emulators get higher priority; It is assumed that
-# if you install a rare terminal emulator, you probably use it.
-# gnome-terminal/konsole/xterm on the other hand are often installed as part of
-# a desktop environment or as fallback terminal emulators.
-mime ^ranger/x-terminal-emulator, has terminology = terminology -e "$@"
-mime ^ranger/x-terminal-emulator, has kitty = kitty -- "$@"
-mime ^ranger/x-terminal-emulator, has alacritty = alacritty -e "$@"
-mime ^ranger/x-terminal-emulator, has sakura = sakura -e "$@"
-mime ^ranger/x-terminal-emulator, has lilyterm = lilyterm -e "$@"
-#mime ^ranger/x-terminal-emulator, has cool-retro-term = cool-retro-term -e "$@"
-mime ^ranger/x-terminal-emulator, has termite = termite -x '"$@"'
-#mime ^ranger/x-terminal-emulator, has yakuake = yakuake -e "$@"
-mime ^ranger/x-terminal-emulator, has guake = guake -ne "$@"
-mime ^ranger/x-terminal-emulator, has tilda = tilda -c "$@"
-mime ^ranger/x-terminal-emulator, has st = st -e "$@"
-mime ^ranger/x-terminal-emulator, has terminator = terminator -x "$@"
-mime ^ranger/x-terminal-emulator, has urxvt = urxvt -e "$@"
-mime ^ranger/x-terminal-emulator, has pantheon-terminal = pantheon-terminal -e "$@"
-mime ^ranger/x-terminal-emulator, has lxterminal = lxterminal -e "$@"
-mime ^ranger/x-terminal-emulator, has mate-terminal = mate-terminal -x "$@"
-mime ^ranger/x-terminal-emulator, has xfce4-terminal = xfce4-terminal -x "$@"
-mime ^ranger/x-terminal-emulator, has konsole = konsole -e "$@"
-mime ^ranger/x-terminal-emulator, has gnome-terminal = gnome-terminal -- "$@"
-mime ^ranger/x-terminal-emulator, has xterm = xterm -e "$@"
-
-#-------------------------------------------
-# Misc
-#-------------------------------------------
-label wallpaper, number 11, mime ^image, has feh, X = feh --bg-scale "$1"
-label wallpaper, number 12, mime ^image, has feh, X = feh --bg-tile "$1"
-label wallpaper, number 13, mime ^image, has feh, X = feh --bg-center "$1"
-label wallpaper, number 14, mime ^image, has feh, X = feh --bg-fill "$1"
-
-#-------------------------------------------
-# Generic file openers
-#-------------------------------------------
-label open, has xdg-open = xdg-open -- "$@"
-label open, has open     = open -- "$@"
-
-# Define the editor for non-text files + pager as last action
-              !mime ^text, !ext xml|json|csv|tex|py|pl|rb|js|sh|php  = ask
-label editor, !mime ^text, !ext xml|json|csv|tex|py|pl|rb|js|sh|php  = ${VISUAL:-$EDITOR} -- "$@"
-label pager,  !mime ^text, !ext xml|json|csv|tex|py|pl|rb|js|sh|php  = "$PAGER" -- "$@"
-
-
-######################################################################
-# The actions below are left so low down in this file on purpose, so #
-# they are never triggered accidentally.                             #
-######################################################################
-
-# Execute a file as program/script.
-mime application/x-executable = "$1"
-
-# Move the file to trash using trash-cli.
-label trash, has trash-put = trash-put -- "$@"
-label trash = mkdir -p -- ${XDG_DATA_DIR:-$HOME/.ranger}/ranger-trash; mv -- "$@" ${XDG_DATA_DIR:-$HOME/.ranger}/ranger-trash

ranger/scope.sh

@@ -1,350 +0,0 @@
-#!/usr/bin/env bash
-
-set -o noclobber -o noglob -o nounset -o pipefail
-IFS=$'\n'
-
-## If the option `use_preview_script` is set to `true`,
-## then this script will be called and its output will be displayed in ranger.
-## ANSI color codes are supported.
-## STDIN is disabled, so interactive scripts won't work properly
-
-## This script is considered a configuration file and must be updated manually.
-## It will be left untouched if you upgrade ranger.
-
-## Because of some automated testing we do on the script #'s for comments need
-## to be doubled up. Code that is commented out, because it's an alternative for
-## example, gets only one #.
-
-## Meanings of exit codes:
-## code | meaning    | action of ranger
-## -----+------------+-------------------------------------------
-## 0    | success    | Display stdout as preview
-## 1    | no preview | Display no preview at all
-## 2    | plain text | Display the plain content of the file
-## 3    | fix width  | Don't reload when width changes
-## 4    | fix height | Don't reload when height changes
-## 5    | fix both   | Don't ever reload
-## 6    | image      | Display the image `$IMAGE_CACHE_PATH` points to as an image preview
-## 7    | image      | Display the file directly as an image
-
-## Script arguments
-FILE_PATH="${1}"         # Full path of the highlighted file
-PV_WIDTH="${2}"          # Width of the preview pane (number of fitting characters)
-## shellcheck disable=SC2034 # PV_HEIGHT is provided for convenience and unused
-PV_HEIGHT="${3}"         # Height of the preview pane (number of fitting characters)
-IMAGE_CACHE_PATH="${4}"  # Full path that should be used to cache image preview
-PV_IMAGE_ENABLED="${5}"  # 'True' if image previews are enabled, 'False' otherwise.
-
-FILE_EXTENSION="${FILE_PATH##*.}"
-FILE_EXTENSION_LOWER="$(printf "%s" "${FILE_EXTENSION}" | tr '[:upper:]' '[:lower:]')"
-
-## Settings
-HIGHLIGHT_SIZE_MAX=262143  # 256KiB
-HIGHLIGHT_TABWIDTH=${HIGHLIGHT_TABWIDTH:-8}
-HIGHLIGHT_STYLE=${HIGHLIGHT_STYLE:-pablo}
-HIGHLIGHT_OPTIONS="--replace-tabs=${HIGHLIGHT_TABWIDTH} --style=${HIGHLIGHT_STYLE} ${HIGHLIGHT_OPTIONS:-}"
-PYGMENTIZE_STYLE=${PYGMENTIZE_STYLE:-autumn}
-OPENSCAD_IMGSIZE=${RNGR_OPENSCAD_IMGSIZE:-1000,1000}
-OPENSCAD_COLORSCHEME=${RNGR_OPENSCAD_COLORSCHEME:-Tomorrow Night}
-
-handle_extension() {
-    case "${FILE_EXTENSION_LOWER}" in
-        ## Archive
-        a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
-        rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
-            atool --list -- "${FILE_PATH}" && exit 5
-            bsdtar --list --file "${FILE_PATH}" && exit 5
-            exit 1;;
-        rar)
-            ## Avoid password prompt by providing empty password
-            unrar lt -p- -- "${FILE_PATH}" && exit 5
-            exit 1;;
-        7z)
-            ## Avoid password prompt by providing empty password
-            7z l -p -- "${FILE_PATH}" && exit 5
-            exit 1;;
-
-        ## PDF
-        pdf)
-            ## Preview as text conversion
-            pdftotext -l 10 -nopgbrk -q -- "${FILE_PATH}" - | \
-              fmt -w "${PV_WIDTH}" && exit 5
-            mutool draw -F txt -i -- "${FILE_PATH}" 1-10 | \
-              fmt -w "${PV_WIDTH}" && exit 5
-            exiftool "${FILE_PATH}" && exit 5
-            exit 1;;
-
-        ## BitTorrent
-        torrent)
-            transmission-show -- "${FILE_PATH}" && exit 5
-            exit 1;;
-
-        ## OpenDocument
-        odt|ods|odp|sxw)
-            ## Preview as text conversion
-            odt2txt "${FILE_PATH}" && exit 5
-            ## Preview as markdown conversion
-            pandoc -s -t markdown -- "${FILE_PATH}" && exit 5
-            exit 1;;
-
-        ## XLSX
-        xlsx)
-            ## Preview as csv conversion
-            ## Uses: https://github.com/dilshod/xlsx2csv
-            xlsx2csv -- "${FILE_PATH}" && exit 5
-            exit 1;;
-
-        ## HTML
-        htm|html|xhtml)
-            ## Preview as text conversion
-            w3m -dump "${FILE_PATH}" && exit 5
-            lynx -dump -- "${FILE_PATH}" && exit 5
-            elinks -dump "${FILE_PATH}" && exit 5
-            pandoc -s -t markdown -- "${FILE_PATH}" && exit 5
-            ;;
-
-        ## JSON
-        json)
-            jq --color-output . "${FILE_PATH}" && exit 5
-            python -m json.tool -- "${FILE_PATH}" && exit 5
-            ;;
-
-        ## Direct Stream Digital/Transfer (DSDIFF) and wavpack aren't detected
-        ## by file(1).
-        dff|dsf|wv|wvc)
-            mediainfo "${FILE_PATH}" && exit 5
-            exiftool "${FILE_PATH}" && exit 5
-            ;; # Continue with next handler on failure
-    esac
-}
-
-handle_image() {
-    ## Size of the preview if there are multiple options or it has to be
-    ## rendered from vector graphics. If the conversion program allows
-    ## specifying only one dimension while keeping the aspect ratio, the width
-    ## will be used.
-    local DEFAULT_SIZE="1920x1080"
-
-    local mimetype="${1}"
-    case "${mimetype}" in
-        ## SVG
-        # image/svg+xml|image/svg)
-        #     convert -- "${FILE_PATH}" "${IMAGE_CACHE_PATH}" && exit 6
-        #     exit 1;;
-
-        ## DjVu
-        # image/vnd.djvu)
-        #     ddjvu -format=tiff -quality=90 -page=1 -size="${DEFAULT_SIZE}" \
-        #           - "${IMAGE_CACHE_PATH}" < "${FILE_PATH}" \
-        #           && exit 6 || exit 1;;
-
-        ## Image
-        image/*)
-            local orientation
-            orientation="$( identify -format '%[EXIF:Orientation]\n' -- "${FILE_PATH}" )"
-            ## If orientation data is present and the image actually
-            ## needs rotating ("1" means no rotation)...
-            if [[ -n "$orientation" && "$orientation" != 1 ]]; then
-                ## ...auto-rotate the image according to the EXIF data.
-                convert -- "${FILE_PATH}" -auto-orient "${IMAGE_CACHE_PATH}" && exit 6
-            fi
-
-            ## `w3mimgdisplay` will be called for all images (unless overriden
-            ## as above), but might fail for unsupported types.
-            exit 7;;
-
-        ## Video
-        # video/*)
-        #     # Thumbnail
-        #     ffmpegthumbnailer -i "${FILE_PATH}" -o "${IMAGE_CACHE_PATH}" -s 0 && exit 6
-        #     exit 1;;
-
-        ## PDF
-        # application/pdf)
-        #     pdftoppm -f 1 -l 1 \
-        #              -scale-to-x "${DEFAULT_SIZE%x*}" \
-        #              -scale-to-y -1 \
-        #              -singlefile \
-        #              -jpeg -tiffcompression jpeg \
-        #              -- "${FILE_PATH}" "${IMAGE_CACHE_PATH%.*}" \
-        #         && exit 6 || exit 1;;
-
-
-        ## ePub, MOBI, FB2 (using Calibre)
-        # application/epub+zip|application/x-mobipocket-ebook|\
-        # application/x-fictionbook+xml)
-        #     # ePub (using https://github.com/marianosimone/epub-thumbnailer)
-        #     epub-thumbnailer "${FILE_PATH}" "${IMAGE_CACHE_PATH}" \
-        #         "${DEFAULT_SIZE%x*}" && exit 6
-        #     ebook-meta --get-cover="${IMAGE_CACHE_PATH}" -- "${FILE_PATH}" \
-        #         >/dev/null && exit 6
-        #     exit 1;;
-
-        ## Font
-        application/font*|application/*opentype)
-            preview_png="/tmp/$(basename "${IMAGE_CACHE_PATH%.*}").png"
-            if fontimage -o "${preview_png}" \
-                         --pixelsize "120" \
-                         --fontname \
-                         --pixelsize "80" \
-                         --text "  ABCDEFGHIJKLMNOPQRSTUVWXYZ  " \
-                         --text "  abcdefghijklmnopqrstuvwxyz  " \
-                         --text "  0123456789.:,;(*!?') ff fl fi ffi ffl  " \
-                         --text "  The quick brown fox jumps over the lazy dog.  " \
-                         "${FILE_PATH}";
-            then
-                convert -- "${preview_png}" "${IMAGE_CACHE_PATH}" \
-                    && rm "${preview_png}" \
-                    && exit 6
-            else
-                exit 1
-            fi
-            ;;
-
-        ## Preview archives using the first image inside.
-        ## (Very useful for comic book collections for example.)
-        # application/zip|application/x-rar|application/x-7z-compressed|\
-        #     application/x-xz|application/x-bzip2|application/x-gzip|application/x-tar)
-        #     local fn=""; local fe=""
-        #     local zip=""; local rar=""; local tar=""; local bsd=""
-        #     case "${mimetype}" in
-        #         application/zip) zip=1 ;;
-        #         application/x-rar) rar=1 ;;
-        #         application/x-7z-compressed) ;;
-        #         *) tar=1 ;;
-        #     esac
-        #     { [ "$tar" ] && fn=$(tar --list --file "${FILE_PATH}"); } || \
-        #     { fn=$(bsdtar --list --file "${FILE_PATH}") && bsd=1 && tar=""; } || \
-        #     { [ "$rar" ] && fn=$(unrar lb -p- -- "${FILE_PATH}"); } || \
-        #     { [ "$zip" ] && fn=$(zipinfo -1 -- "${FILE_PATH}"); } || return
-        #
-        #     fn=$(echo "$fn" | python -c "import sys; import mimetypes as m; \
-        #             [ print(l, end='') for l in sys.stdin if \
-        #               (m.guess_type(l[:-1])[0] or '').startswith('image/') ]" |\
-        #         sort -V | head -n 1)
-        #     [ "$fn" = "" ] && return
-        #     [ "$bsd" ] && fn=$(printf '%b' "$fn")
-        #
-        #     [ "$tar" ] && tar --extract --to-stdout \
-        #         --file "${FILE_PATH}" -- "$fn" > "${IMAGE_CACHE_PATH}" && exit 6
-        #     fe=$(echo -n "$fn" | sed 's/[][*?\]/\\\0/g')
-        #     [ "$bsd" ] && bsdtar --extract --to-stdout \
-        #         --file "${FILE_PATH}" -- "$fe" > "${IMAGE_CACHE_PATH}" && exit 6
-        #     [ "$bsd" ] || [ "$tar" ] && rm -- "${IMAGE_CACHE_PATH}"
-        #     [ "$rar" ] && unrar p -p- -inul -- "${FILE_PATH}" "$fn" > \
-        #         "${IMAGE_CACHE_PATH}" && exit 6
-        #     [ "$zip" ] && unzip -pP "" -- "${FILE_PATH}" "$fe" > \
-        #         "${IMAGE_CACHE_PATH}" && exit 6
-        #     [ "$rar" ] || [ "$zip" ] && rm -- "${IMAGE_CACHE_PATH}"
-        #     ;;
-    esac
-
-    # openscad_image() {
-    #     TMPPNG="$(mktemp -t XXXXXX.png)"
-    #     openscad --colorscheme="${OPENSCAD_COLORSCHEME}" \
-    #         --imgsize="${OPENSCAD_IMGSIZE/x/,}" \
-    #         -o "${TMPPNG}" "${1}"
-    #     mv "${TMPPNG}" "${IMAGE_CACHE_PATH}"
-    # }
-
-    # case "${FILE_EXTENSION_LOWER}" in
-    #     ## 3D models
-    #     ## OpenSCAD only supports png image output, and ${IMAGE_CACHE_PATH}
-    #     ## is hardcoded as jpeg. So we make a tempfile.png and just
-    #     ## move/rename it to jpg. This works because image libraries are
-    #     ## smart enough to handle it.
-    #     csg|scad)
-    #         openscad_image "${FILE_PATH}" && exit 6
-    #         ;;
-    #     3mf|amf|dxf|off|stl)
-    #         openscad_image <(echo "import(\"${FILE_PATH}\");") && exit 6
-    #         ;;
-    # esac
-}
-
-handle_mime() {
-    local mimetype="${1}"
-    case "${mimetype}" in
-        ## RTF and DOC
-        text/rtf|*msword)
-            ## Preview as text conversion
-            ## note: catdoc does not always work for .doc files
-            ## catdoc: http://www.wagner.pp.ru/~vitus/software/catdoc/
-            catdoc -- "${FILE_PATH}" && exit 5
-            exit 1;;
-
-        ## DOCX, ePub, FB2 (using markdown)
-        ## You might want to remove "|epub" and/or "|fb2" below if you have
-        ## uncommented other methods to preview those formats
-        *wordprocessingml.document|*/epub+zip|*/x-fictionbook+xml)
-            ## Preview as markdown conversion
-            pandoc -s -t markdown -- "${FILE_PATH}" && exit 5
-            exit 1;;
-
-        ## XLS
-        *ms-excel)
-            ## Preview as csv conversion
-            ## xls2csv comes with catdoc:
-            ##   http://www.wagner.pp.ru/~vitus/software/catdoc/
-            xls2csv -- "${FILE_PATH}" && exit 5
-            exit 1;;
-
-        ## Text
-        text/* | */xml)
-            ## Syntax highlight
-            if [[ "$( stat --printf='%s' -- "${FILE_PATH}" )" -gt "${HIGHLIGHT_SIZE_MAX}" ]]; then
-                exit 2
-            fi
-            if [[ "$( tput colors )" -ge 256 ]]; then
-                local pygmentize_format='terminal256'
-                local highlight_format='xterm256'
-            else
-                local pygmentize_format='terminal'
-                local highlight_format='ansi'
-            fi
-            env HIGHLIGHT_OPTIONS="${HIGHLIGHT_OPTIONS}" highlight \
-                --out-format="${highlight_format}" \
-                --force -- "${FILE_PATH}" && exit 5
-            env COLORTERM=8bit bat --color=always --style="plain" \
-                -- "${FILE_PATH}" && exit 5
-            pygmentize -f "${pygmentize_format}" -O "style=${PYGMENTIZE_STYLE}"\
-                -- "${FILE_PATH}" && exit 5
-            exit 2;;
-
-        ## DjVu
-        image/vnd.djvu)
-            ## Preview as text conversion (requires djvulibre)
-            djvutxt "${FILE_PATH}" | fmt -w "${PV_WIDTH}" && exit 5
-            exiftool "${FILE_PATH}" && exit 5
-            exit 1;;
-
-        ## Image
-        image/*)
-            ## Preview as text conversion
-            # img2txt --gamma=0.6 --width="${PV_WIDTH}" -- "${FILE_PATH}" && exit 4
-            exiftool "${FILE_PATH}" && exit 5
-            exit 1;;
-
-        ## Video and audio
-        video/* | audio/*)
-            mediainfo "${FILE_PATH}" && exit 5
-            exiftool "${FILE_PATH}" && exit 5
-            exit 1;;
-    esac
-}
-
-handle_fallback() {
-    echo '----- File Type Classification -----' && file --dereference --brief -- "${FILE_PATH}" && exit 5
-    exit 1
-}
-
-
-MIMETYPE="$( file --dereference --brief --mime-type -- "${FILE_PATH}" )"
-if [[ "${PV_IMAGE_ENABLED}" == 'True' ]]; then
-    handle_image "${MIMETYPE}"
-fi
-handle_extension
-handle_mime "${MIMETYPE}"
-handle_fallback
-
-exit 1

rofi/config-compact.rasi

@@ -0,0 +1,252 @@
+/*
+#  ____        __ _  
+# |  _ \ ___  / _(_) 
+# | |_) / _ \| |_| | 
+# |  _ < (_) |  _| | 
+# |_| \_\___/|_| |_| 
+#                    
+# by Stephan Raabe (2023) 
+# ----------------------------------------------------- 
+*/
+
+/* ---- Configuration ---- */
+configuration {
+    modi:                       "drun,run";
+    font:                       "Fira Sans Bold 10";
+    show-icons:                 false;
+    icon-theme:                 "kora";
+    display-drun:               "APPS";
+    display-run:                "RUN";
+    display-filebrowser:        "FILES";
+    display-window:             "WINDOW";
+	hover-select:               true;
+    me-select-entry:            "";
+    me-accept-entry:            "MousePrimary";
+    drun-display-format:        "{name}";
+    window-format:              "{w} · {c} · {t}";
+    
+}
+
+/* ---- Load pywal colors (custom wal template) ---- */
+@import "~/.cache/wal/colors-rofi-pywal"
+
+/* ---- Window ---- */
+window {
+    width:                        600px;
+    x-offset:                     0px;
+    y-offset:                     65px;
+    spacing:                      0px;
+    padding:                      0px;
+    margin:                       0px; 
+    color:                        #FFFFFF;
+    border:                       3px;
+    border-color:                 #FFFFFF;
+    cursor:                       "default";
+    transparency:                 "real";
+    location:                     north;
+    anchor:                       north;
+    fullscreen:                   false;
+    enabled:                      true;
+    border-radius:                10px;
+    background-color:             transparent;
+}
+
+/* ---- Mainbox ---- */
+mainbox {
+    enabled:                      true;
+    orientation:                  horizontal;
+    spacing:                      0px;
+    margin:                       0px;
+    background-color:             @background;
+    background-image:             url("~/.cache/current_wallpaper.jpg", height);
+    children:                     ["listbox"];
+}
+
+/* ---- Imagebox ---- */
+imagebox {
+    padding:                      18px;
+    background-color:             transparent;
+    orientation:                  vertical;
+    children:                     [ "inputbar", "dummy", "mode-switcher" ];
+}
+
+/* ---- Listbox ---- */
+listbox {
+    spacing:                     20px;
+    background-color:            transparent;
+    orientation:                 vertical;
+    children:                    [ "inputbar", "message", "listview" ];
+}
+
+/* ---- Dummy ---- */
+dummy {
+    background-color:            transparent;
+}
+
+/* ---- Inputbar ---- */
+inputbar {
+    enabled:                      true;
+    text-color:                   @foreground;
+    spacing:                      10px;
+    padding:                      15px;
+    border-radius:                0px;
+    border-color:                 @foreground;
+    background-color:             @background;
+    children:                     [ "textbox-prompt-colon", "entry" ];
+}
+
+textbox-prompt-colon {
+    enabled:                      true;
+    expand:                       false;
+    str:                          "";
+    background-color:             transparent;
+    text-color:                   inherit;
+}
+
+entry {
+    enabled:                      true;
+    background-color:             transparent;
+    text-color:                   inherit;
+    cursor:                       text;
+    placeholder:                  "Search";
+    placeholder-color:            inherit;
+}
+
+/* ---- Mode Switcher ---- */
+mode-switcher{
+    enabled:                      true;
+    spacing:                      20px;
+    background-color:             transparent;
+    text-color:                   @foreground;
+}
+
+button {
+    padding:                      10px;
+    border-radius:                10px;
+    background-color:             @background;
+    text-color:                   inherit;
+    cursor:                       pointer;
+    border:                       0px;
+}
+
+button selected {
+    background-color:             @color11;
+    text-color:                   @foreground;
+}
+
+/* ---- Listview ---- */
+listview {
+    enabled:                      true;
+    columns:                      1;
+    lines:                        8;
+    cycle:                        true;
+    dynamic:                      true;
+    scrollbar:                    false;
+    layout:                       vertical;
+    reverse:                      false;
+    fixed-height:                 true;
+    fixed-columns:                true;
+    spacing:                      0px;
+    padding:                      10px;
+    margin:                       0px;
+    background-color:             @background;
+    border:0px;
+}
+
+/* ---- Element ---- */
+element {
+    enabled:                      true;
+    padding:                      10px;
+    margin:                       5px;
+    cursor:                       pointer;
+    background-color:             @background;
+    border-radius:                10px;
+    border:                       2px;
+}
+
+element normal.normal {
+    background-color:            inherit;
+    text-color:                  @foreground;
+}
+
+element normal.urgent {
+    background-color:            inherit;
+    text-color:                  @foreground;
+}
+
+element normal.active {
+    background-color:            inherit;
+    text-color:                  @foreground;
+}
+
+element selected.normal {
+    background-color:            @color11;
+    text-color:                  @foreground;
+}
+
+element selected.urgent {
+    background-color:            inherit;
+    text-color:                  @foreground;
+}
+
+element selected.active {
+    background-color:            inherit;
+    text-color:                  @foreground;
+}
+
+element alternate.normal {
+    background-color:            inherit;
+    text-color:                  @foreground;
+}
+
+element alternate.urgent {
+    background-color:            inherit;
+    text-color:                  @foreground;
+}
+
+element alternate.active {
+    background-color:            inherit;
+    text-color:                  @foreground;
+}
+
+element-icon {
+    background-color:            transparent;
+    text-color:                  inherit;
+    size:                        32px;
+    cursor:                      inherit;
+}
+
+element-text {
+    background-color:            transparent;
+    text-color:                  inherit;
+    cursor:                      inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+
+/*****----- Message -----*****/
+message {
+    background-color:            transparent;
+    border:0px;
+    margin:20px 0px 0px 0px;
+    padding:0px;
+    spacing:0px;
+    border-radius: 10px;
+}
+
+textbox {
+    padding:                     15px;
+    margin:                      0px;
+    border-radius:               0px;
+    background-color:            @background;
+    text-color:                  @foreground;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+
+error-message {
+    padding:                     15px;
+    border-radius:               20px;
+    background-color:            @background;
+    text-color:                  @foreground;
+}

rofi/config-power.rasi

@@ -43,8 +43,8 @@ window {
     border-color:                 #FFFFFF;
     cursor:                       "default";
     transparency:                 "real";
-    location:                     northeast;
+    location:                     center;
-    anchor:                       northeast;
+    anchor:                       center;
     fullscreen:                   false;
     enabled:                      true;
     border-radius:                10px;

rofi/config-screenshot.rasi

@@ -33,7 +33,6 @@ configuration {
 /* ---- Window ---- */
 window {
     width:                        400px;
-    height:                       130px;
     x-offset:                     0px;
     y-offset:                     0px;
     spacing:                      0px;

scripts/applauncher.sh

@@ -1,12 +0,0 @@
-#!/bin/bash
-#     _                  _                           _                
-#    / \   _ __  _ __   | |    __ _ _   _ _ __   ___| |__   ___ _ __  
-#   / _ \ | '_ \| '_ \  | |   / _` | | | | '_ \ / __| '_ \ / _ \ '__| 
-#  / ___ \| |_) | |_) | | |__| (_| | |_| | | | | (__| | | |  __/ |    
-# /_/   \_\ .__/| .__/  |_____\__,_|\__,_|_| |_|\___|_| |_|\___|_|    
-#         |_|   |_|                                                   
-#  
-# by Stephan Raabe (2023) 
-# ----------------------------------------------------- 
-
-rofi -show drun

scripts/cleanup.sh

@@ -1,3 +1,14 @@
+#!/bin/bash
+#       _                                 
+#   ___| | ___  __ _ _ __    _   _ _ __   
+#  / __| |/ _ \/ _` | '_ \  | | | | '_ \  
+# | (__| |  __/ (_| | | | | | |_| | |_) | 
+#  \___|_|\___|\__,_|_| |_|  \__,_| .__/  
+#                                 |_|     
+#  
+# by Stephan Raabe (2023) 
+# ----------------------------------------------------- 
+
 yay -Scc
 su -c 'pacman -Qtdq | pacman -Rns -'
 su -c 'pacman -Qqd | pacman -Rsu -'