From 31cc14f0d07ad211f834b93614038bdeb6a51f02 Mon Sep 17 00:00:00 2001 From: Yingjie Wang Date: Thu, 29 Feb 2024 01:33:51 -0500 Subject: [PATCH] clean up --- minimal-preseed.txt | 341 +++----------------------------------------- 1 file changed, 23 insertions(+), 318 deletions(-) diff --git a/minimal-preseed.txt b/minimal-preseed.txt index 192579f..8c2debb 100644 --- a/minimal-preseed.txt +++ b/minimal-preseed.txt @@ -1,142 +1,61 @@ -#_preseed_V1 -#### Contents of the preconfiguration file (for bookworm) -### Localization -# Preseeding only locale sets language, country and locale. -d-i debian-installer/locale string en_US.UTF-8 +############################################################ +# # +# ███╗ ███╗██╗███╗ ██╗██╗███╗ ███╗ █████╗ ██╗ # +# ████╗ ████║██║████╗ ██║██║████╗ ████║██╔══██╗██║ # +# ██╔████╔██║██║██╔██╗ ██║██║██╔████╔██║███████║██║ # +# ██║╚██╔╝██║██║██║╚██╗██║██║██║╚██╔╝██║██╔══██║██║ # +# ██║ ╚═╝ ██║██║██║ ╚████║██║██║ ╚═╝ ██║██║ ██║███████╗ # +# ╚═╝ ╚═╝╚═╝╚═╝ ╚═══╝╚═╝╚═╝ ╚═╝╚═╝ ╚═╝╚══════╝ # +# # +# ██████╗ ███████╗██████╗ ██╗ █████╗ ███╗ ██╗ # +# ██╔══██╗██╔════╝██╔══██╗██║██╔══██╗████╗ ██║ # +# ██████╔╝█████╗ ██║ ██║██║███████║██╔██╗ ██║ # +# ██╔══██╗██╔══╝ ██║ ██║██║██╔══██║██║╚██╗██║ # +# ██████╔╝███████╗██████╔╝██║██║ ██║██║ ╚████║ # +# ╚═════╝ ╚══════╝╚═════╝ ╚═╝╚═╝ ╚═╝╚═╝ ╚═══╝ # +# # +############################################################ +# +# By Yingjie Wang +# +############################################################ -# Keyboard selection. +### Localization +d-i debian-installer/locale string en_US.UTF-8 d-i keyboard-configuration/xkb-keymap select us ### Network configuration -# Disable network configuration entirely. This is useful for cdrom -# installations on non-networked devices where the network questions, -# warning and long timeouts are a nuisance. -#d-i netcfg/enable boolean false - -# netcfg will choose an interface that has link if possible. This makes it -# skip displaying a list if there is more than one interface. d-i netcfg/choose_interface select auto - -# To pick a particular interface instead: -#d-i netcfg/choose_interface select eth1 - -# To set a different link detection timeout (default is 3 seconds). -# Values are interpreted as seconds. -#d-i netcfg/link_wait_timeout string 10 - -# Any hostname and domain names assigned from dhcp take precedence over -# values set here. However, setting the values still prevents the questions -# from being shown, even if values come from dhcp. d-i netcfg/get_hostname string debian-vm d-i netcfg/get_domain string local - -# Disable that annoying WEP key dialog. -d-i netcfg/wireless_wep string -# The wacky dhcp hostname that some ISPs use as a password of sorts. -#d-i netcfg/dhcp_hostname string radish - -# If you want to completely disable firmware lookup (i.e. not use firmware -# files or packages that might be available on installation images): -#d-i hw-detect/firmware-lookup string never - -# If non-free firmware is needed for the network or other hardware, you can -# configure the installer to always try to load it, without prompting. Or -# change to false to disable asking. d-i hw-detect/load_firmware boolean true ### Mirror settings -# Mirror protocol: -# If you select ftp, the mirror/country string does not need to be set. -# Default value for the mirror protocol: http. -#d-i mirror/protocol string ftp d-i mirror/country string manual d-i mirror/http/hostname string http.us.debian.org d-i mirror/http/directory string /debian d-i mirror/http/proxy string -# Suite to install. -#d-i mirror/suite string testing -# Suite to use for loading installer components (optional). -#d-i mirror/udeb/suite string testing - ### Account setup -# Skip creation of a root account (normal user account will be able to -# use sudo). d-i passwd/root-login boolean false - -# To create a normal user account. d-i passwd/user-fullname string Yingjie Wang d-i passwd/username string wyj -# Normal user's password, either in clear text -#d-i passwd/user-password password insecure -#d-i passwd/user-password-again password insecure -# or encrypted using a crypt(3) hash. d-i passwd/user-password-crypted password $6$t/elWbp41BhqoPU0$hAZ4CqWa.U6YKOfKgvSiK1LdZbCCzum5L6uGayO3HTWLkuLVbuvMhHWFfNF.kifH7orv3DECP2yKqVwqDppae0 -# Create the first user with the specified UID instead of the default. -#d-i passwd/user-uid string 1010 - -# The user account will be added to some standard initial groups. To -# override that, use this. -#d-i passwd/user-default-groups string audio cdrom video ### Clock and time zone setup -# Controls whether or not the hardware clock is set to UTC. d-i clock-setup/utc boolean true - -# You may set this to any valid setting for $TZ; see the contents of -# /usr/share/zoneinfo/ for valid values. d-i time/zone string America/New_York - -# Controls whether to use NTP to set the clock during the install d-i clock-setup/ntp boolean true -# NTP server to use. The default is almost always fine here. -#d-i clock-setup/ntp-server string ntp.example.com ### Partitioning -## Partitioning example -# If the system has free space you can choose to only partition that space. -# This is only honoured if partman-auto/method (below) is not set. -#d-i partman-auto/init_automatically_partition select biggest_free - -# Alternatively, you may specify a disk to partition. If the system has only -# one disk the installer will default to using that, but otherwise the device -# name must be given in traditional, non-devfs format (so e.g. /dev/sda -# and not e.g. /dev/discs/disc0/disc). -# For example, to use the first SCSI/SATA hard disk: -#d-i partman-auto/disk string /dev/sda -# In addition, you'll need to specify the method to use. -# The presently available methods are: -# - regular: use the usual partition types for your architecture -# - lvm: use LVM to partition the disk -# - crypto: use LVM within an encrypted partition d-i partman-auto/method string lvm - -# You can define the amount of space that will be used for the LVM volume -# group. It can either be a size with its unit (eg. 20 GB), a percentage of -# free space or the 'max' keyword. d-i partman-auto-lvm/guided_size string max - -# If one of the disks that are going to be automatically partitioned -# contains an old LVM configuration, the user will normally receive a -# warning. This can be preseeded away... d-i partman-lvm/device_remove_lvm boolean true -# The same applies to pre-existing software RAID array: d-i partman-md/device_remove_md boolean true -# And the same goes for the confirmation to write the lvm partitions. d-i partman-lvm/confirm boolean true d-i partman-lvm/confirm_nooverwrite boolean true - -# You can choose one of the three predefined partitioning recipes: -# - atomic: all files in one partition -# - home: separate /home partition -# - multi: separate /home, /var, and /tmp partitions d-i partman-auto/choose_recipe select efi-root -# Or provide a recipe of your own... -# If you have a way to get a recipe file into the d-i environment, you can -# just point at it. -#d-i partman-auto/expert_recipe_file string /hd-media/recipe - d-i partman-auto/expert_recipe string \ efi-root :: \ 256 256 512 free \ @@ -150,247 +69,33 @@ d-i partman-auto/expert_recipe string \ mountpoint{ / } \ . -# If not, you can put an entire recipe into the preconfiguration file in one -# (logical) line. This example creates a small /boot partition, suitable -# swap, and uses the rest of the space for the root partition: -#d-i partman-auto/expert_recipe string \ -# boot-root :: \ -# 40 50 100 ext3 \ -# $primary{ } $bootable{ } \ -# method{ format } format{ } \ -# use_filesystem{ } filesystem{ ext3 } \ -# mountpoint{ /boot } \ -# . \ -# 500 10000 1000000000 ext3 \ -# method{ format } format{ } \ -# use_filesystem{ } filesystem{ ext3 } \ -# mountpoint{ / } \ -# . \ -# 64 512 300% linux-swap \ -# method{ swap } format{ } \ -# . - -# The full recipe format is documented in the file partman-auto-recipe.txt -# included in the 'debian-installer' package or available from D-I source -# repository. This also documents how to specify settings such as file -# system labels, volume group names and which physical devices to include -# in a volume group. - -## Partitioning for EFI -# If your system needs an EFI partition you could add something like -# this to the recipe above, as the first element in the recipe: -# 538 538 1075 free \ -# $iflabel{ gpt } \ -# $reusemethod{ } \ -# method{ efi } \ -# format{ } \ -# . \ -# -# The fragment above is for the amd64 architecture; the details may be -# different on other architectures. The 'partman-auto' package in the -# D-I source repository may have an example you can follow. - -# This makes partman automatically partition without confirmation, provided -# that you told it what to do using one of the methods above. -d-i partman-partitioning/confirm_write_new_label boolean true -d-i partman/choose_partition select finish -d-i partman/confirm boolean true -d-i partman/confirm_nooverwrite boolean true - -# Force UEFI booting ('BIOS compatibility' will be lost). Default: false. -#d-i partman-efi/non_efi_system boolean true -# Ensure the partition table is GPT - this is required for EFI d-i partman-partitioning/choose_label select gpt d-i partman-partitioning/default_label string gpt -# When disk encryption is enabled, skip wiping the partitions beforehand. -#d-i partman-auto-crypto/erase_disks boolean false - -## Partitioning using RAID -# The method should be set to "raid". -#d-i partman-auto/method string raid -# Specify the disks to be partitioned. They will all get the same layout, -# so this will only work if the disks are the same size. -#d-i partman-auto/disk string /dev/sda /dev/sdb - -# Next you need to specify the physical partitions that will be used. -#d-i partman-auto/expert_recipe string \ -# multiraid :: \ -# 1000 5000 4000 raid \ -# $primary{ } method{ raid } \ -# . \ -# 64 512 300% raid \ -# method{ raid } \ -# . \ -# 500 10000 1000000000 raid \ -# method{ raid } \ -# . - -# Last you need to specify how the previously defined partitions will be -# used in the RAID setup. Remember to use the correct partition numbers -# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported; -# devices are separated using "#". -# Parameters are: -# \ -# - -#d-i partman-auto-raid/recipe string \ -# 1 2 0 ext3 / \ -# /dev/sda1#/dev/sdb1 \ -# . \ -# 1 2 0 swap - \ -# /dev/sda5#/dev/sdb5 \ -# . \ -# 0 2 0 ext3 /home \ -# /dev/sda6#/dev/sdb6 \ -# . - -# For additional information see the file partman-auto-raid-recipe.txt -# included in the 'debian-installer' package or available from D-I source -# repository. - -# This makes partman automatically partition without confirmation. d-i partman-md/confirm boolean true d-i partman-partitioning/confirm_write_new_label boolean true d-i partman/choose_partition select finish d-i partman/confirm boolean true d-i partman/confirm_nooverwrite boolean true -## Controlling how partitions are mounted -# The default is to mount by UUID, but you can also choose "traditional" to -# use traditional device names, or "label" to try filesystem labels before -# falling back to UUIDs. d-i partman/mount_style select uuid ### Base system installation -# Configure APT to not install recommended packages by default. Use of this -# option can result in an incomplete system and should only be used by very -# experienced users. -#d-i base-installer/install-recommends boolean false - -# The kernel image (meta) package to be installed; "none" can be used if no -# kernel is to be installed. -#d-i base-installer/kernel/image string linux-image-686 ### Apt setup -# Choose, if you want to scan additional installation media -# (default: false). d-i apt-setup/cdrom/set-first boolean false -# You can choose to install non-free firmware. d-i apt-setup/non-free-firmware boolean true -# You can choose to install non-free and contrib software. -#d-i apt-setup/non-free boolean true d-i apt-setup/contrib boolean true -# Uncomment the following line, if you don't want to have the sources.list -# entry for a DVD/BD installation image active in the installed system -# (entries for netinst or CD images will be disabled anyway, regardless of -# this setting). d-i apt-setup/disable-cdrom-entries boolean true -# Uncomment this if you don't want to use a network mirror. -#d-i apt-setup/use_mirror boolean false -# Select which update services to use; define the mirrors to be used. -# Values shown below are the normal defaults. -#d-i apt-setup/services-select multiselect security, updates -#d-i apt-setup/security_host string security.debian.org ### Package selection tasksel tasksel/first multiselect standard, ssh-server -# Or choose to not get the tasksel dialog displayed at all (and don't install -# any packages): -#d-i pkgsel/run_tasksel boolean false - -# Individual additional packages to install -#d-i pkgsel/include string openssh-server build-essential -# Whether to upgrade packages after debootstrap. -# Allowed values: none, safe-upgrade, full-upgrade -#d-i pkgsel/upgrade select none - -# You can choose, if your system will report back on what software you have -# installed, and what software you use. The default is not to report back, -# but sending reports helps the project determine what software is most -# popular and should be included on the first CD/DVD. -#popularity-contest popularity-contest/participate boolean false - ### Boot loader installation -# Grub is the boot loader (for x86). - -# This is fairly safe to set, it makes grub install automatically to the UEFI -# partition/boot record if no other operating system is detected on the machine. d-i grub-installer/only_debian boolean true - -# This one makes grub-installer install to the UEFI partition/boot record, if -# it also finds some other OS, which is less safe as it might not be able to -# boot that other OS. d-i grub-installer/with_other_os boolean true - -# Due notably to potential USB sticks, the location of the primary drive can -# not be determined safely in general, so this needs to be specified: -#d-i grub-installer/bootdev string /dev/sda -# To install to the primary device (assuming it is not a USB stick): d-i grub-installer/bootdev string default -# Alternatively, if you want to install to a location other than the UEFI -# parition/boot record, uncomment and edit these lines: -#d-i grub-installer/only_debian boolean false -#d-i grub-installer/with_other_os boolean false -#d-i grub-installer/bootdev string (hd0,1) -# To install grub to multiple disks: -#d-i grub-installer/bootdev string (hd0,1) (hd1,1) (hd2,1) - -# Use the following option to add additional boot parameters for the -# installed system (if supported by the bootloader installer). -# Note: options passed to the installer will be added automatically. -#d-i debian-installer/add-kernel-opts string nousb - ### Finishing up the installation -# During installations from serial console, the regular virtual consoles -# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next -# line to prevent this. #d-i finish-install/keep-consoles boolean true - -# Avoid that last message about the install being complete. d-i finish-install/reboot_in_progress note - -# This will prevent the installer from ejecting the CD during the reboot, -# which is useful in some situations. -#d-i cdrom-detect/eject boolean false - -# This is how to make the installer shutdown when finished, but not -# reboot into the installed system. -#d-i debian-installer/exit/halt boolean true -# This will power off the machine instead of just halting it. -#d-i debian-installer/exit/poweroff boolean true - -### Preseeding other packages -# Depending on what software you choose to install, or if things go wrong -# during the installation process, it's possible that other questions may -# be asked. You can preseed those too, of course. To get a list of every -# possible question that could be asked during an install, do an -# installation, and then run these commands: -# debconf-get-selections --installer > file -# debconf-get-selections >> file - - -#### Advanced options -### Running custom commands during the installation -# d-i preseeding is inherently not secure. Nothing in the installer checks -# for attempts at buffer overflows or other exploits of the values of a -# preconfiguration file like this one. Only use preconfiguration files from -# trusted locations! To drive that home, and because it's generally useful, -# here's a way to run any shell command you'd like inside the installer, -# automatically. - -# This first command is run as early as possible, just after -# preseeding is read. -#d-i preseed/early_command string anna-install some-udeb -# This command is run immediately before the partitioner starts. It may be -# useful to apply dynamic partitioner preseeding that depends on the state -# of the disks (which may not be visible when preseed/early_command runs). -#d-i partman/early_command \ -# string debconf-set partman-auto/disk "$(list-devices disk | head -n1)" -# This command is run just before the install finishes, but when there is -# still a usable /target directory. You can chroot to /target and use it -# directly, or use the apt-install and in-target commands to easily install -# packages and run commands in the target system. -#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh